Standards
Standards
The FCHO Standards database is structured along the seven categories depicted below. These categories encompass a vast array of standards related to the fuel cell & hydrogen space and are further divided into subcategories to facilitate easier searching. When the category most relevant to the user’s search is selected, additional detail is provided by clicking on the specific standard of interest within the list generated. The links to the official Standardisation body is included for further reference on individual standards.
Alternatively, the user can enter free text to perform a key word search, which can be further refined using the category and subcategory filters as required.
-
IEC 62282-3-100:2019 Fuel cell technologies - Part 3-100: Stationary fuel cell power systemsx
IEC 62282-3-100:2019
Title of Standard: Fuel cell technologies - Part 3-100: Stationary fuel cell power systems
Status of Standard: Published
Description : IEC 62282-3-100:2019 applies to stationary packaged, self-contained fuel cell power systems or fuel cell power systems comprised of factory matched packages of integrated systems which generate electricity through electrochemical reactions.
Direct link to this standard, and more information
Responsible Technical Committee: IEC/TC 105
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Stationary applications
- Auxiliary power units
- Aircraft
- Stationary applications
- Stationary Fuel Cells
- Backup power / genset
- Stationary applications
- Stationary Fuel Cells
- CHP
- Stationary applications
- Auxiliary power units
- Maritime
- Stationary applications
- Auxiliary power units
- Military
- Stationary applications
- Auxiliary power units
- Other APU
- Stationary applications
- Stationary Fuel Cells
- Other stationary
- Stationary applications
- Stationary Fuel Cells
- Prime power
- Stationary applications
- Auxiliary power units
- Refrigeration
Technical Committee:IEC/TC 105IEC 62282-3-100:2019 applies to stationary packaged, self-contained fuel cell power systems or fuel cell power systems comprised of factory matched packages of integrated systems which generate electricity through electrochemical reactions. -
IEC 62282-3-201/AMD1 ED2 Amendment 1 - Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systemsx
IEC 62282-3-201/AMD1 ED2
Title of Standard: Amendment 1 - Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems
Status of Standard: UnderDevelopment
Description : N.A.
Direct link to this standard, and more information
Responsible Technical Committee: IEC/TC 105
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Stationary applications
- Stationary Fuel Cells
- Backup power / genset
- Stationary applications
- Stationary Fuel Cells
- CHP
- Stationary applications
- Stationary Fuel Cells
- Other stationary
- Stationary applications
- Stationary Fuel Cells
- Prime power
Technical Committee:IEC/TC 105 -
IEC TS 62282-9-101 ED1 Fuel cell technologies - Part 9-101: Evaluation methodology for the environmental performance of fuel cell power systems based on life cycle thinking - Streamlined life-cycle considered environmental performance characterization of stationary fuel cell power systems for residential applicationsx
IEC TS 62282-9-101 ED1
Title of Standard: Fuel cell technologies - Part 9-101: Evaluation methodology for the environmental performance of fuel cell power systems based on life cycle thinking - Streamlined life-cycle considered environmental performance characterization of stationary fuel cell power systems for residential applications
Status of Standard: UnderDevelopment
Description : N.A.
Direct link to this standard, and more information
Responsible Technical Committee: IEC/TC 105
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Stationary applications
- Stationary Fuel Cells
- Backup power / genset
- Stationary applications
- Stationary Fuel Cells
- CHP
- Stationary applications
- Stationary Fuel Cells
- Other stationary
- Stationary applications
- Stationary Fuel Cells
- Prime power
Technical Committee:IEC/TC 105 -
IEC TS 62282-9-102 ED1 Fuel cell technologies ? Part 9-102: Product category rules for environmental product declarations of stationary fuel cell power systems and alternative systems for residential applicationsx
IEC TS 62282-9-102 ED1
Title of Standard: Fuel cell technologies ? Part 9-102: Product category rules for environmental product declarations of stationary fuel cell power systems and alternative systems for residential applications
Status of Standard: UnderDevelopment
Description : N.A.
Direct link to this standard, and more information
Responsible Technical Committee: IEC/TC 105
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Stationary applications
- Stationary Fuel Cells
- Backup power / genset
- Stationary applications
- Stationary Fuel Cells
- CHP
- Stationary applications
- Stationary Fuel Cells
- Other stationary
- Stationary applications
- Stationary Fuel Cells
- Prime power
Technical Committee:IEC/TC 105 -
ISO 26142:2010 Hydrogen detection apparatus -- Stationary applicationsx
ISO 26142:2010
Title of Standard: Hydrogen detection apparatus -- Stationary applications
Status of Standard: Published
Description : ISO 26142:2010 defines the performance requirements and test methods of hydrogen detection apparatus that is designed to measure and monitor hydrogen concentrations in stationary applications.
Direct link to this standard, and more information
Responsible Technical Committee: ISO/TC 197
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Stationary applications
- Auxiliary power units
- Aircraft
- Stationary applications
- Stationary Fuel Cells
- Backup power / genset
- Stationary applications
- Stationary Fuel Cells
- CHP
- Stationary applications
- Storage
- Cylinder Storage
- Stationary applications
- Auxiliary power units
- Maritime
- Stationary applications
- Auxiliary power units
- Military
- Stationary applications
- Auxiliary power units
- Other APU
- Stationary applications
- Stationary Fuel Cells
- Other stationary
- Stationary applications
- Stationary Fuel Cells
- Prime power
- Stationary applications
- Auxiliary power units
- Refrigeration
- Stationary applications
- Auxiliary power units
- Trucks
- Stationary applications
- Storage
- Underground Storage
Technical Committee:ISO/TC 197ISO 26142:2010 defines the performance requirements and test methods of hydrogen detection apparatus that is designed to measure and monitor hydrogen concentrations in stationary applications. -
ISO/TR 52000-1:2017 Energy performance of buildings - Overarching EPB assessment - Part 1: General framework and proceduresx
ISO/TR 52000-1:2017
Title of Standard: Energy performance of buildings - Overarching EPB assessment - Part 1: General framework and procedures
Status of Standard: Published
Description : NEN-EN-ISO 52000-1 establishes a systematic, comprehensive and modular structure for assessing the energy performance of new and existing buildings (EPB) in a holistic way. It is applicable to the assessment of overall energy use of a building, by measurement or calculation, and the calculation of energy performance in terms of primary energy or other energy-related metrics. It takes into account the specific possibilities and limitations for the different applications, such as building design, new buildings ?as built?, and existing buildings in the use phase as well as renovation.
Direct link to this standard, and more information
Responsible Technical Committee: ISO/TC 163
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Stationary applications
- Stationary Fuel Cells
- Backup power / genset
- Stationary applications
- Stationary Fuel Cells
- CHP
- Stationary applications
- Stationary Fuel Cells
- Other stationary
- Stationary applications
- Stationary Fuel Cells
- Prime power
Technical Committee:ISO/TC 163NEN-EN-ISO 52000-1 establishes a systematic, comprehensive and modular structure for assessing the energy performance of new and existing buildings (EPB) in a holistic way. It is applicable to the assessment of overall energy use of a building, by measurement or calculation, and the calculation of energy performance in terms of primary energy or other energy-related metrics. It takes into account the specific possibilities and limitations for the different applications, such as building design, new buildings ?as built?, and existing buildings in the use phase as well as renovation. -
ISO/TR 52000-2:2017 Energy performance of buildings -- Overarching EPB assessment -- Part 2: Explanation and justification of ISO 52000-1x
ISO/TR 52000-2:2017
Title of Standard: Energy performance of buildings -- Overarching EPB assessment -- Part 2: Explanation and justification of ISO 52000-1
Status of Standard: Published
Description : It contains information to support the correct understanding, use and national implementation of ISO 52000?1.
Direct link to this standard, and more information
Responsible Technical Committee: ISO/TC 163
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Stationary applications
- Stationary Fuel Cells
- Backup power / genset
- Stationary applications
- Stationary Fuel Cells
- CHP
- Stationary applications
- Stationary Fuel Cells
- Other stationary
- Stationary applications
- Stationary Fuel Cells
- Prime power
Technical Committee:ISO/TC 163It contains information to support the correct understanding, use and national implementation of ISO 52000?1.
-
IEC 62282-3-100:2019 Fuel cell technologies - Part 3-100: Stationary fuel cell power systemsx
IEC 62282-3-100:2019
Title of Standard: Fuel cell technologies - Part 3-100: Stationary fuel cell power systems
Status of Standard: Published
Description : IEC 62282-3-100:2019 applies to stationary packaged, self-contained fuel cell power systems or fuel cell power systems comprised of factory matched packages of integrated systems which generate electricity through electrochemical reactions.
Direct link to this standard, and more information
Responsible Technical Committee: IEC/TC 105
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Stationary applications
- Auxiliary power units
- Aircraft
- Stationary applications
- Stationary Fuel Cells
- Backup power / genset
- Stationary applications
- Stationary Fuel Cells
- CHP
- Stationary applications
- Auxiliary power units
- Maritime
- Stationary applications
- Auxiliary power units
- Military
- Stationary applications
- Auxiliary power units
- Other APU
- Stationary applications
- Stationary Fuel Cells
- Other stationary
- Stationary applications
- Stationary Fuel Cells
- Prime power
- Stationary applications
- Auxiliary power units
- Refrigeration
Technical Committee:IEC/TC 105IEC 62282-3-100:2019 applies to stationary packaged, self-contained fuel cell power systems or fuel cell power systems comprised of factory matched packages of integrated systems which generate electricity through electrochemical reactions. -
IEC 62282-3-201/AMD1 ED2 Amendment 1 - Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systemsx
IEC 62282-3-201/AMD1 ED2
Title of Standard: Amendment 1 - Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems
Status of Standard: UnderDevelopment
Description : N.A.
Direct link to this standard, and more information
Responsible Technical Committee: IEC/TC 105
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Stationary applications
- Stationary Fuel Cells
- Backup power / genset
- Stationary applications
- Stationary Fuel Cells
- CHP
- Stationary applications
- Stationary Fuel Cells
- Other stationary
- Stationary applications
- Stationary Fuel Cells
- Prime power
Technical Committee:IEC/TC 105 -
IEC 62282-8-101:2020 ED1 Fuel cell technologies - Part 8-101: Energy storage systems using fuel cell modules in reverse mode - Test procedures for solid oxide single cell and stack performance including reversible operationx
IEC 62282-8-101:2020 ED1
Title of Standard: Fuel cell technologies - Part 8-101: Energy storage systems using fuel cell modules in reverse mode - Test procedures for solid oxide single cell and stack performance including reversible operation
Status of Standard: Published
Description : IEC 62282-8-101 addresses solid oxide cell (SOC) and stack assembly unit(s). It providesfor testing systems, instruments and measuring methods to test the performance of SOCcell/stack assembly units for energy storage purposes.
Direct link to this standard, and more information
Responsible Technical Committee: IEC/TC 105
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Stationary applications
- Storage
- Cylinder Storage
- Stationary applications
- Stationary Fuel Cells
- Prime power
Technical Committee:IEC/TC 105IEC 62282-8-101 addresses solid oxide cell (SOC) and stack assembly unit(s). It providesfor testing systems, instruments and measuring methods to test the performance of SOCcell/stack assembly units for energy storage purposes. -
IEC 62282-8-201:2020 ED1 Fuel cell technologies - Part 8-201: Energy storage systems using fuel cell modules in reverse mode - Power-to-power systems - Test procedures for the performance of power-to-power systemsx
IEC 62282-8-201:2020 ED1
Title of Standard: Fuel cell technologies - Part 8-201: Energy storage systems using fuel cell modules in reverse mode - Power-to-power systems - Test procedures for the performance of power-to-power systems
Status of Standard: Published
Description : IEC 62282-8-101 addresses solid oxide cell (SOC) and stack assembly unit(s). It providesfor testing systems, instruments and measuring methods to test the performance of SOCcell/stack assembly units for energy storage purposes.
Direct link to this standard, and more information
Responsible Technical Committee: IEC/TC 105
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Stationary applications
- Storage
- Cylinder Storage
- Stationary applications
- Stationary Fuel Cells
- Prime power
Technical Committee:IEC/TC 105IEC 62282-8-101 addresses solid oxide cell (SOC) and stack assembly unit(s). It providesfor testing systems, instruments and measuring methods to test the performance of SOCcell/stack assembly units for energy storage purposes. -
IEC TS 62282-9-101 ED1 Fuel cell technologies - Part 9-101: Evaluation methodology for the environmental performance of fuel cell power systems based on life cycle thinking - Streamlined life-cycle considered environmental performance characterization of stationary fuel cell power systems for residential applicationsx
IEC TS 62282-9-101 ED1
Title of Standard: Fuel cell technologies - Part 9-101: Evaluation methodology for the environmental performance of fuel cell power systems based on life cycle thinking - Streamlined life-cycle considered environmental performance characterization of stationary fuel cell power systems for residential applications
Status of Standard: UnderDevelopment
Description : N.A.
Direct link to this standard, and more information
Responsible Technical Committee: IEC/TC 105
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Stationary applications
- Stationary Fuel Cells
- Backup power / genset
- Stationary applications
- Stationary Fuel Cells
- CHP
- Stationary applications
- Stationary Fuel Cells
- Other stationary
- Stationary applications
- Stationary Fuel Cells
- Prime power
Technical Committee:IEC/TC 105 -
IEC TS 62282-9-102 ED1 Fuel cell technologies ? Part 9-102: Product category rules for environmental product declarations of stationary fuel cell power systems and alternative systems for residential applicationsx
IEC TS 62282-9-102 ED1
Title of Standard: Fuel cell technologies ? Part 9-102: Product category rules for environmental product declarations of stationary fuel cell power systems and alternative systems for residential applications
Status of Standard: UnderDevelopment
Description : N.A.
Direct link to this standard, and more information
Responsible Technical Committee: IEC/TC 105
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Stationary applications
- Stationary Fuel Cells
- Backup power / genset
- Stationary applications
- Stationary Fuel Cells
- CHP
- Stationary applications
- Stationary Fuel Cells
- Other stationary
- Stationary applications
- Stationary Fuel Cells
- Prime power
Technical Committee:IEC/TC 105 -
ISO 26142:2010 Hydrogen detection apparatus -- Stationary applicationsx
ISO 26142:2010
Title of Standard: Hydrogen detection apparatus -- Stationary applications
Status of Standard: Published
Description : ISO 26142:2010 defines the performance requirements and test methods of hydrogen detection apparatus that is designed to measure and monitor hydrogen concentrations in stationary applications.
Direct link to this standard, and more information
Responsible Technical Committee: ISO/TC 197
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Stationary applications
- Auxiliary power units
- Aircraft
- Stationary applications
- Stationary Fuel Cells
- Backup power / genset
- Stationary applications
- Stationary Fuel Cells
- CHP
- Stationary applications
- Storage
- Cylinder Storage
- Stationary applications
- Auxiliary power units
- Maritime
- Stationary applications
- Auxiliary power units
- Military
- Stationary applications
- Auxiliary power units
- Other APU
- Stationary applications
- Stationary Fuel Cells
- Other stationary
- Stationary applications
- Stationary Fuel Cells
- Prime power
- Stationary applications
- Auxiliary power units
- Refrigeration
- Stationary applications
- Auxiliary power units
- Trucks
- Stationary applications
- Storage
- Underground Storage
Technical Committee:ISO/TC 197ISO 26142:2010 defines the performance requirements and test methods of hydrogen detection apparatus that is designed to measure and monitor hydrogen concentrations in stationary applications. -
ISO/TR 52000-1:2017 Energy performance of buildings - Overarching EPB assessment - Part 1: General framework and proceduresx
ISO/TR 52000-1:2017
Title of Standard: Energy performance of buildings - Overarching EPB assessment - Part 1: General framework and procedures
Status of Standard: Published
Description : NEN-EN-ISO 52000-1 establishes a systematic, comprehensive and modular structure for assessing the energy performance of new and existing buildings (EPB) in a holistic way. It is applicable to the assessment of overall energy use of a building, by measurement or calculation, and the calculation of energy performance in terms of primary energy or other energy-related metrics. It takes into account the specific possibilities and limitations for the different applications, such as building design, new buildings ?as built?, and existing buildings in the use phase as well as renovation.
Direct link to this standard, and more information
Responsible Technical Committee: ISO/TC 163
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Stationary applications
- Stationary Fuel Cells
- Backup power / genset
- Stationary applications
- Stationary Fuel Cells
- CHP
- Stationary applications
- Stationary Fuel Cells
- Other stationary
- Stationary applications
- Stationary Fuel Cells
- Prime power
Technical Committee:ISO/TC 163NEN-EN-ISO 52000-1 establishes a systematic, comprehensive and modular structure for assessing the energy performance of new and existing buildings (EPB) in a holistic way. It is applicable to the assessment of overall energy use of a building, by measurement or calculation, and the calculation of energy performance in terms of primary energy or other energy-related metrics. It takes into account the specific possibilities and limitations for the different applications, such as building design, new buildings ?as built?, and existing buildings in the use phase as well as renovation. -
ISO/TR 52000-2:2017 Energy performance of buildings -- Overarching EPB assessment -- Part 2: Explanation and justification of ISO 52000-1x
ISO/TR 52000-2:2017
Title of Standard: Energy performance of buildings -- Overarching EPB assessment -- Part 2: Explanation and justification of ISO 52000-1
Status of Standard: Published
Description : It contains information to support the correct understanding, use and national implementation of ISO 52000?1.
Direct link to this standard, and more information
Responsible Technical Committee: ISO/TC 163
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Stationary applications
- Stationary Fuel Cells
- Backup power / genset
- Stationary applications
- Stationary Fuel Cells
- CHP
- Stationary applications
- Stationary Fuel Cells
- Other stationary
- Stationary applications
- Stationary Fuel Cells
- Prime power
Technical Committee:ISO/TC 163It contains information to support the correct understanding, use and national implementation of ISO 52000?1.
-
IEC 62282-3-100:2019 Fuel cell technologies - Part 3-100: Stationary fuel cell power systemsx
IEC 62282-3-100:2019
Title of Standard: Fuel cell technologies - Part 3-100: Stationary fuel cell power systems
Status of Standard: Published
Description : IEC 62282-3-100:2019 applies to stationary packaged, self-contained fuel cell power systems or fuel cell power systems comprised of factory matched packages of integrated systems which generate electricity through electrochemical reactions.
Direct link to this standard, and more information
Responsible Technical Committee: IEC/TC 105
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Stationary applications
- Auxiliary power units
- Aircraft
- Stationary applications
- Stationary Fuel Cells
- Backup power / genset
- Stationary applications
- Stationary Fuel Cells
- CHP
- Stationary applications
- Auxiliary power units
- Maritime
- Stationary applications
- Auxiliary power units
- Military
- Stationary applications
- Auxiliary power units
- Other APU
- Stationary applications
- Stationary Fuel Cells
- Other stationary
- Stationary applications
- Stationary Fuel Cells
- Prime power
- Stationary applications
- Auxiliary power units
- Refrigeration
Technical Committee:IEC/TC 105IEC 62282-3-100:2019 applies to stationary packaged, self-contained fuel cell power systems or fuel cell power systems comprised of factory matched packages of integrated systems which generate electricity through electrochemical reactions. -
IEC 62282-3-201/AMD1 ED2 Amendment 1 - Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systemsx
IEC 62282-3-201/AMD1 ED2
Title of Standard: Amendment 1 - Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems
Status of Standard: UnderDevelopment
Description : N.A.
Direct link to this standard, and more information
Responsible Technical Committee: IEC/TC 105
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Stationary applications
- Stationary Fuel Cells
- Backup power / genset
- Stationary applications
- Stationary Fuel Cells
- CHP
- Stationary applications
- Stationary Fuel Cells
- Other stationary
- Stationary applications
- Stationary Fuel Cells
- Prime power
Technical Committee:IEC/TC 105 -
IEC TS 62282-9-101 ED1 Fuel cell technologies - Part 9-101: Evaluation methodology for the environmental performance of fuel cell power systems based on life cycle thinking - Streamlined life-cycle considered environmental performance characterization of stationary fuel cell power systems for residential applicationsx
IEC TS 62282-9-101 ED1
Title of Standard: Fuel cell technologies - Part 9-101: Evaluation methodology for the environmental performance of fuel cell power systems based on life cycle thinking - Streamlined life-cycle considered environmental performance characterization of stationary fuel cell power systems for residential applications
Status of Standard: UnderDevelopment
Description : N.A.
Direct link to this standard, and more information
Responsible Technical Committee: IEC/TC 105
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Stationary applications
- Stationary Fuel Cells
- Backup power / genset
- Stationary applications
- Stationary Fuel Cells
- CHP
- Stationary applications
- Stationary Fuel Cells
- Other stationary
- Stationary applications
- Stationary Fuel Cells
- Prime power
Technical Committee:IEC/TC 105 -
IEC TS 62282-9-102 ED1 Fuel cell technologies ? Part 9-102: Product category rules for environmental product declarations of stationary fuel cell power systems and alternative systems for residential applicationsx
IEC TS 62282-9-102 ED1
Title of Standard: Fuel cell technologies ? Part 9-102: Product category rules for environmental product declarations of stationary fuel cell power systems and alternative systems for residential applications
Status of Standard: UnderDevelopment
Description : N.A.
Direct link to this standard, and more information
Responsible Technical Committee: IEC/TC 105
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Stationary applications
- Stationary Fuel Cells
- Backup power / genset
- Stationary applications
- Stationary Fuel Cells
- CHP
- Stationary applications
- Stationary Fuel Cells
- Other stationary
- Stationary applications
- Stationary Fuel Cells
- Prime power
Technical Committee:IEC/TC 105 -
ISO 26142:2010 Hydrogen detection apparatus -- Stationary applicationsx
ISO 26142:2010
Title of Standard: Hydrogen detection apparatus -- Stationary applications
Status of Standard: Published
Description : ISO 26142:2010 defines the performance requirements and test methods of hydrogen detection apparatus that is designed to measure and monitor hydrogen concentrations in stationary applications.
Direct link to this standard, and more information
Responsible Technical Committee: ISO/TC 197
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Stationary applications
- Auxiliary power units
- Aircraft
- Stationary applications
- Stationary Fuel Cells
- Backup power / genset
- Stationary applications
- Stationary Fuel Cells
- CHP
- Stationary applications
- Storage
- Cylinder Storage
- Stationary applications
- Auxiliary power units
- Maritime
- Stationary applications
- Auxiliary power units
- Military
- Stationary applications
- Auxiliary power units
- Other APU
- Stationary applications
- Stationary Fuel Cells
- Other stationary
- Stationary applications
- Stationary Fuel Cells
- Prime power
- Stationary applications
- Auxiliary power units
- Refrigeration
- Stationary applications
- Auxiliary power units
- Trucks
- Stationary applications
- Storage
- Underground Storage
Technical Committee:ISO/TC 197ISO 26142:2010 defines the performance requirements and test methods of hydrogen detection apparatus that is designed to measure and monitor hydrogen concentrations in stationary applications. -
ISO/TR 52000-1:2017 Energy performance of buildings - Overarching EPB assessment - Part 1: General framework and proceduresx
ISO/TR 52000-1:2017
Title of Standard: Energy performance of buildings - Overarching EPB assessment - Part 1: General framework and procedures
Status of Standard: Published
Description : NEN-EN-ISO 52000-1 establishes a systematic, comprehensive and modular structure for assessing the energy performance of new and existing buildings (EPB) in a holistic way. It is applicable to the assessment of overall energy use of a building, by measurement or calculation, and the calculation of energy performance in terms of primary energy or other energy-related metrics. It takes into account the specific possibilities and limitations for the different applications, such as building design, new buildings ?as built?, and existing buildings in the use phase as well as renovation.
Direct link to this standard, and more information
Responsible Technical Committee: ISO/TC 163
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Stationary applications
- Stationary Fuel Cells
- Backup power / genset
- Stationary applications
- Stationary Fuel Cells
- CHP
- Stationary applications
- Stationary Fuel Cells
- Other stationary
- Stationary applications
- Stationary Fuel Cells
- Prime power
Technical Committee:ISO/TC 163NEN-EN-ISO 52000-1 establishes a systematic, comprehensive and modular structure for assessing the energy performance of new and existing buildings (EPB) in a holistic way. It is applicable to the assessment of overall energy use of a building, by measurement or calculation, and the calculation of energy performance in terms of primary energy or other energy-related metrics. It takes into account the specific possibilities and limitations for the different applications, such as building design, new buildings ?as built?, and existing buildings in the use phase as well as renovation. -
ISO/TR 52000-2:2017 Energy performance of buildings -- Overarching EPB assessment -- Part 2: Explanation and justification of ISO 52000-1x
ISO/TR 52000-2:2017
Title of Standard: Energy performance of buildings -- Overarching EPB assessment -- Part 2: Explanation and justification of ISO 52000-1
Status of Standard: Published
Description : It contains information to support the correct understanding, use and national implementation of ISO 52000?1.
Direct link to this standard, and more information
Responsible Technical Committee: ISO/TC 163
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Stationary applications
- Stationary Fuel Cells
- Backup power / genset
- Stationary applications
- Stationary Fuel Cells
- CHP
- Stationary applications
- Stationary Fuel Cells
- Other stationary
- Stationary applications
- Stationary Fuel Cells
- Prime power
Technical Committee:ISO/TC 163It contains information to support the correct understanding, use and national implementation of ISO 52000?1.
-
EN 1266:2002 Independent gas-fired convection heaters incorporating a fan to assist transportation of combustion air and/or flue gasesx
EN 1266:2002
Title of Standard: Independent gas-fired convection heaters incorporating a fan to assist transportation of combustion air and/or flue gases
Status of Standard: Published
Description : This European standard specifies the requirements and test methods for construction, safety, fitness for purpose, rational use of energy, classification and marking of gas-fired convection heating appliances that are fitted with fan-assisted atmospheric burners, and fully pre-mixed burners.
Direct link to this standard, and more information
Responsible Technical Committee: CEN/TC 62
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Stationary applications
- Stationary Fuel Cells
- Other stationary
Technical Committee:CEN/TC 62This European standard specifies the requirements and test methods for construction, safety, fitness for purpose, rational use of energy, classification and marking of gas-fired convection heating appliances that are fitted with fan-assisted atmospheric burners, and fully pre-mixed burners. -
EN 1266:2002/A1:2005 To include: Updated references, technical changes resulting from the study of Formal Vote comments.x
EN 1266:2002/A1:2005
Title of Standard: To include: Updated references, technical changes resulting from the study of Formal Vote comments.
Status of Standard: Published
Description : This European standard specifies the requirements and test methods for construction, safety, fitness for purpose, rational use of energy, classification and marking of gas-fired convection heating appliances that are fitted with fan-assisted atmospheric burners, and fully pre-mixed burners.
Direct link to this standard, and more information
Responsible Technical Committee: CEN/TC 62
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Stationary applications
- Stationary Fuel Cells
- Other stationary
Technical Committee:CEN/TC 62This European standard specifies the requirements and test methods for construction, safety, fitness for purpose, rational use of energy, classification and marking of gas-fired convection heating appliances that are fitted with fan-assisted atmospheric burners, and fully pre-mixed burners. -
EN 14438:2006 Gas-fired insets for heating more than one roomx
EN 14438:2006
Title of Standard: Gas-fired insets for heating more than one room
Status of Standard: Published
Description : This European Standard specifies the requirements and test methods for the construction, safety, marking and rational use of energy of gas-fired insets for heating more than one room that are intended to be built into a casing made from brickwork or similar material.
Direct link to this standard, and more information
Responsible Technical Committee: CEN/TC 62
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Stationary applications
- Stationary Fuel Cells
- Other stationary
Technical Committee:CEN/TC 62This European Standard specifies the requirements and test methods for the construction, safety, marking and rational use of energy of gas-fired insets for heating more than one room that are intended to be built into a casing made from brickwork or similar material. -
EN 15502-1:2012+A1:2015 Gas-fired heating boilers. General requirements and testsx
EN 15502-1:2012+A1:2015
Title of Standard: Gas-fired heating boilers. General requirements and tests
Status of Standard: Published
Description : This European Standard specifies the common requirements and test methods concerning, in particular the construction, safety, fitness for purpose, and rational use of energy, as well as the classification, marking and energy labelling of gas-fired central heating boilers that are fitted with atmospheric burners, fan assisted atmospheric burners or fully premixed burners, and are hereafter referred to as boilers.
Direct link to this standard, and more information
Responsible Technical Committee: CEN/TC 109
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Stationary applications
- Stationary Fuel Cells
- Other stationary
Technical Committee:CEN/TC 109This European Standard specifies the common requirements and test methods concerning, in particular the construction, safety, fitness for purpose, and rational use of energy, as well as the classification, marking and energy labelling of gas-fired central heating boilers that are fitted with atmospheric burners, fan assisted atmospheric burners or fully premixed burners, and are hereafter referred to as boilers. -
EN 30-1-1:2008+A3:2013 Domestic cooking appliances burning gas. Safety. Generalx
EN 30-1-1:2008+A3:2013
Title of Standard: Domestic cooking appliances burning gas. Safety. General
Status of Standard: Published
Description : "This European Standard specifies the construction and performance characteristics as well as the requirements and methods of test for the safety and marking of freestanding and built-in domestic cooking appliances burning the combustible gases given in 4.1 according to the categories specified in 4.2, referred to in the text as ""appliances""."
Direct link to this standard, and more information
Responsible Technical Committee: CEN/TC 49
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Stationary applications
- Stationary Fuel Cells
- Other stationary
Technical Committee:CEN/TC 49"This European Standard specifies the construction and performance characteristics as well as the requirements and methods of test for the safety and marking of freestanding and built-in domestic cooking appliances burning the combustible gases given in 4.1 according to the categories specified in 4.2, referred to in the text as ""appliances""." -
EN 613:2000/A1:2003 Independent gas-fired convection heatersx
EN 613:2000/A1:2003
Title of Standard: Independent gas-fired convection heaters
Status of Standard: Published
Description : To include: Updated references, technical changes resulting from deferred technical comments made prior Formal Vote.
Direct link to this standard, and more information
Responsible Technical Committee: CEN/TC 62
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Stationary applications
- Stationary Fuel Cells
- Other stationary
- Stationary applications
- Stationary Fuel Cells
- Other stationary
Technical Committee:CEN/TC 62To include: Updated references, technical changes resulting from deferred technical comments made prior Formal Vote. -
EN 613:2000/A1:2003 Independent gas-fired convection heatersx
EN 613:2000/A1:2003
Title of Standard: Independent gas-fired convection heaters
Status of Standard: Published
Description : To include: Updated references, technical changes resulting from deferred technical comments made prior Formal Vote.
Direct link to this standard, and more information
Responsible Technical Committee: CEN/TC 62
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Stationary applications
- Stationary Fuel Cells
- Other stationary
- Stationary applications
- Stationary Fuel Cells
- Other stationary
Technical Committee:CEN/TC 62To include: Updated references, technical changes resulting from deferred technical comments made prior Formal Vote. -
IEC 62282-3-100:2019 Fuel cell technologies - Part 3-100: Stationary fuel cell power systemsx
IEC 62282-3-100:2019
Title of Standard: Fuel cell technologies - Part 3-100: Stationary fuel cell power systems
Status of Standard: Published
Description : IEC 62282-3-100:2019 applies to stationary packaged, self-contained fuel cell power systems or fuel cell power systems comprised of factory matched packages of integrated systems which generate electricity through electrochemical reactions.
Direct link to this standard, and more information
Responsible Technical Committee: IEC/TC 105
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Stationary applications
- Auxiliary power units
- Aircraft
- Stationary applications
- Stationary Fuel Cells
- Backup power / genset
- Stationary applications
- Stationary Fuel Cells
- CHP
- Stationary applications
- Auxiliary power units
- Maritime
- Stationary applications
- Auxiliary power units
- Military
- Stationary applications
- Auxiliary power units
- Other APU
- Stationary applications
- Stationary Fuel Cells
- Other stationary
- Stationary applications
- Stationary Fuel Cells
- Prime power
- Stationary applications
- Auxiliary power units
- Refrigeration
Technical Committee:IEC/TC 105IEC 62282-3-100:2019 applies to stationary packaged, self-contained fuel cell power systems or fuel cell power systems comprised of factory matched packages of integrated systems which generate electricity through electrochemical reactions. -
IEC 62282-3-201/AMD1 ED2 Amendment 1 - Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systemsx
IEC 62282-3-201/AMD1 ED2
Title of Standard: Amendment 1 - Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems
Status of Standard: UnderDevelopment
Description : N.A.
Direct link to this standard, and more information
Responsible Technical Committee: IEC/TC 105
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Stationary applications
- Stationary Fuel Cells
- Backup power / genset
- Stationary applications
- Stationary Fuel Cells
- CHP
- Stationary applications
- Stationary Fuel Cells
- Other stationary
- Stationary applications
- Stationary Fuel Cells
- Prime power
Technical Committee:IEC/TC 105 -
IEC TS 62282-9-101 ED1 Fuel cell technologies - Part 9-101: Evaluation methodology for the environmental performance of fuel cell power systems based on life cycle thinking - Streamlined life-cycle considered environmental performance characterization of stationary fuel cell power systems for residential applicationsx
IEC TS 62282-9-101 ED1
Title of Standard: Fuel cell technologies - Part 9-101: Evaluation methodology for the environmental performance of fuel cell power systems based on life cycle thinking - Streamlined life-cycle considered environmental performance characterization of stationary fuel cell power systems for residential applications
Status of Standard: UnderDevelopment
Description : N.A.
Direct link to this standard, and more information
Responsible Technical Committee: IEC/TC 105
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Stationary applications
- Stationary Fuel Cells
- Backup power / genset
- Stationary applications
- Stationary Fuel Cells
- CHP
- Stationary applications
- Stationary Fuel Cells
- Other stationary
- Stationary applications
- Stationary Fuel Cells
- Prime power
Technical Committee:IEC/TC 105 -
IEC TS 62282-9-102 ED1 Fuel cell technologies ? Part 9-102: Product category rules for environmental product declarations of stationary fuel cell power systems and alternative systems for residential applicationsx
IEC TS 62282-9-102 ED1
Title of Standard: Fuel cell technologies ? Part 9-102: Product category rules for environmental product declarations of stationary fuel cell power systems and alternative systems for residential applications
Status of Standard: UnderDevelopment
Description : N.A.
Direct link to this standard, and more information
Responsible Technical Committee: IEC/TC 105
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Stationary applications
- Stationary Fuel Cells
- Backup power / genset
- Stationary applications
- Stationary Fuel Cells
- CHP
- Stationary applications
- Stationary Fuel Cells
- Other stationary
- Stationary applications
- Stationary Fuel Cells
- Prime power
Technical Committee:IEC/TC 105 -
ISO 26142:2010 Hydrogen detection apparatus -- Stationary applicationsx
ISO 26142:2010
Title of Standard: Hydrogen detection apparatus -- Stationary applications
Status of Standard: Published
Description : ISO 26142:2010 defines the performance requirements and test methods of hydrogen detection apparatus that is designed to measure and monitor hydrogen concentrations in stationary applications.
Direct link to this standard, and more information
Responsible Technical Committee: ISO/TC 197
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Stationary applications
- Auxiliary power units
- Aircraft
- Stationary applications
- Stationary Fuel Cells
- Backup power / genset
- Stationary applications
- Stationary Fuel Cells
- CHP
- Stationary applications
- Storage
- Cylinder Storage
- Stationary applications
- Auxiliary power units
- Maritime
- Stationary applications
- Auxiliary power units
- Military
- Stationary applications
- Auxiliary power units
- Other APU
- Stationary applications
- Stationary Fuel Cells
- Other stationary
- Stationary applications
- Stationary Fuel Cells
- Prime power
- Stationary applications
- Auxiliary power units
- Refrigeration
- Stationary applications
- Auxiliary power units
- Trucks
- Stationary applications
- Storage
- Underground Storage
Technical Committee:ISO/TC 197ISO 26142:2010 defines the performance requirements and test methods of hydrogen detection apparatus that is designed to measure and monitor hydrogen concentrations in stationary applications. -
ISO/TR 52000-1:2017 Energy performance of buildings - Overarching EPB assessment - Part 1: General framework and proceduresx
ISO/TR 52000-1:2017
Title of Standard: Energy performance of buildings - Overarching EPB assessment - Part 1: General framework and procedures
Status of Standard: Published
Description : NEN-EN-ISO 52000-1 establishes a systematic, comprehensive and modular structure for assessing the energy performance of new and existing buildings (EPB) in a holistic way. It is applicable to the assessment of overall energy use of a building, by measurement or calculation, and the calculation of energy performance in terms of primary energy or other energy-related metrics. It takes into account the specific possibilities and limitations for the different applications, such as building design, new buildings ?as built?, and existing buildings in the use phase as well as renovation.
Direct link to this standard, and more information
Responsible Technical Committee: ISO/TC 163
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Stationary applications
- Stationary Fuel Cells
- Backup power / genset
- Stationary applications
- Stationary Fuel Cells
- CHP
- Stationary applications
- Stationary Fuel Cells
- Other stationary
- Stationary applications
- Stationary Fuel Cells
- Prime power
Technical Committee:ISO/TC 163NEN-EN-ISO 52000-1 establishes a systematic, comprehensive and modular structure for assessing the energy performance of new and existing buildings (EPB) in a holistic way. It is applicable to the assessment of overall energy use of a building, by measurement or calculation, and the calculation of energy performance in terms of primary energy or other energy-related metrics. It takes into account the specific possibilities and limitations for the different applications, such as building design, new buildings ?as built?, and existing buildings in the use phase as well as renovation. -
ISO/TR 52000-2:2017 Energy performance of buildings -- Overarching EPB assessment -- Part 2: Explanation and justification of ISO 52000-1x
ISO/TR 52000-2:2017
Title of Standard: Energy performance of buildings -- Overarching EPB assessment -- Part 2: Explanation and justification of ISO 52000-1
Status of Standard: Published
Description : It contains information to support the correct understanding, use and national implementation of ISO 52000?1.
Direct link to this standard, and more information
Responsible Technical Committee: ISO/TC 163
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Stationary applications
- Stationary Fuel Cells
- Backup power / genset
- Stationary applications
- Stationary Fuel Cells
- CHP
- Stationary applications
- Stationary Fuel Cells
- Other stationary
- Stationary applications
- Stationary Fuel Cells
- Prime power
Technical Committee:ISO/TC 163It contains information to support the correct understanding, use and national implementation of ISO 52000?1.
-
ISO 26142:2010 Hydrogen detection apparatus -- Stationary applicationsx
ISO 26142:2010
Title of Standard: Hydrogen detection apparatus -- Stationary applications
Status of Standard: Published
Description : ISO 26142:2010 defines the performance requirements and test methods of hydrogen detection apparatus that is designed to measure and monitor hydrogen concentrations in stationary applications.
Direct link to this standard, and more information
Responsible Technical Committee: ISO/TC 197
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Stationary applications
- Auxiliary power units
- Aircraft
- Stationary applications
- Stationary Fuel Cells
- Backup power / genset
- Stationary applications
- Stationary Fuel Cells
- CHP
- Stationary applications
- Storage
- Cylinder Storage
- Stationary applications
- Auxiliary power units
- Maritime
- Stationary applications
- Auxiliary power units
- Military
- Stationary applications
- Auxiliary power units
- Other APU
- Stationary applications
- Stationary Fuel Cells
- Other stationary
- Stationary applications
- Stationary Fuel Cells
- Prime power
- Stationary applications
- Auxiliary power units
- Refrigeration
- Stationary applications
- Auxiliary power units
- Trucks
- Stationary applications
- Storage
- Underground Storage
Technical Committee:ISO/TC 197ISO 26142:2010 defines the performance requirements and test methods of hydrogen detection apparatus that is designed to measure and monitor hydrogen concentrations in stationary applications.
-
IEC 62282-3-100:2019 Fuel cell technologies - Part 3-100: Stationary fuel cell power systemsx
IEC 62282-3-100:2019
Title of Standard: Fuel cell technologies - Part 3-100: Stationary fuel cell power systems
Status of Standard: Published
Description : IEC 62282-3-100:2019 applies to stationary packaged, self-contained fuel cell power systems or fuel cell power systems comprised of factory matched packages of integrated systems which generate electricity through electrochemical reactions.
Direct link to this standard, and more information
Responsible Technical Committee: IEC/TC 105
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Stationary applications
- Auxiliary power units
- Aircraft
- Stationary applications
- Stationary Fuel Cells
- Backup power / genset
- Stationary applications
- Stationary Fuel Cells
- CHP
- Stationary applications
- Auxiliary power units
- Maritime
- Stationary applications
- Auxiliary power units
- Military
- Stationary applications
- Auxiliary power units
- Other APU
- Stationary applications
- Stationary Fuel Cells
- Other stationary
- Stationary applications
- Stationary Fuel Cells
- Prime power
- Stationary applications
- Auxiliary power units
- Refrigeration
Technical Committee:IEC/TC 105IEC 62282-3-100:2019 applies to stationary packaged, self-contained fuel cell power systems or fuel cell power systems comprised of factory matched packages of integrated systems which generate electricity through electrochemical reactions. -
ISO 26142:2010 Hydrogen detection apparatus -- Stationary applicationsx
ISO 26142:2010
Title of Standard: Hydrogen detection apparatus -- Stationary applications
Status of Standard: Published
Description : ISO 26142:2010 defines the performance requirements and test methods of hydrogen detection apparatus that is designed to measure and monitor hydrogen concentrations in stationary applications.
Direct link to this standard, and more information
Responsible Technical Committee: ISO/TC 197
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Stationary applications
- Auxiliary power units
- Aircraft
- Stationary applications
- Stationary Fuel Cells
- Backup power / genset
- Stationary applications
- Stationary Fuel Cells
- CHP
- Stationary applications
- Storage
- Cylinder Storage
- Stationary applications
- Auxiliary power units
- Maritime
- Stationary applications
- Auxiliary power units
- Military
- Stationary applications
- Auxiliary power units
- Other APU
- Stationary applications
- Stationary Fuel Cells
- Other stationary
- Stationary applications
- Stationary Fuel Cells
- Prime power
- Stationary applications
- Auxiliary power units
- Refrigeration
- Stationary applications
- Auxiliary power units
- Trucks
- Stationary applications
- Storage
- Underground Storage
Technical Committee:ISO/TC 197ISO 26142:2010 defines the performance requirements and test methods of hydrogen detection apparatus that is designed to measure and monitor hydrogen concentrations in stationary applications.
-
IEC 62282-3-100:2019 Fuel cell technologies - Part 3-100: Stationary fuel cell power systemsx
IEC 62282-3-100:2019
Title of Standard: Fuel cell technologies - Part 3-100: Stationary fuel cell power systems
Status of Standard: Published
Description : IEC 62282-3-100:2019 applies to stationary packaged, self-contained fuel cell power systems or fuel cell power systems comprised of factory matched packages of integrated systems which generate electricity through electrochemical reactions.
Direct link to this standard, and more information
Responsible Technical Committee: IEC/TC 105
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Stationary applications
- Auxiliary power units
- Aircraft
- Stationary applications
- Stationary Fuel Cells
- Backup power / genset
- Stationary applications
- Stationary Fuel Cells
- CHP
- Stationary applications
- Auxiliary power units
- Maritime
- Stationary applications
- Auxiliary power units
- Military
- Stationary applications
- Auxiliary power units
- Other APU
- Stationary applications
- Stationary Fuel Cells
- Other stationary
- Stationary applications
- Stationary Fuel Cells
- Prime power
- Stationary applications
- Auxiliary power units
- Refrigeration
Technical Committee:IEC/TC 105IEC 62282-3-100:2019 applies to stationary packaged, self-contained fuel cell power systems or fuel cell power systems comprised of factory matched packages of integrated systems which generate electricity through electrochemical reactions. -
ISO 26142:2010 Hydrogen detection apparatus -- Stationary applicationsx
ISO 26142:2010
Title of Standard: Hydrogen detection apparatus -- Stationary applications
Status of Standard: Published
Description : ISO 26142:2010 defines the performance requirements and test methods of hydrogen detection apparatus that is designed to measure and monitor hydrogen concentrations in stationary applications.
Direct link to this standard, and more information
Responsible Technical Committee: ISO/TC 197
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Stationary applications
- Auxiliary power units
- Aircraft
- Stationary applications
- Stationary Fuel Cells
- Backup power / genset
- Stationary applications
- Stationary Fuel Cells
- CHP
- Stationary applications
- Storage
- Cylinder Storage
- Stationary applications
- Auxiliary power units
- Maritime
- Stationary applications
- Auxiliary power units
- Military
- Stationary applications
- Auxiliary power units
- Other APU
- Stationary applications
- Stationary Fuel Cells
- Other stationary
- Stationary applications
- Stationary Fuel Cells
- Prime power
- Stationary applications
- Auxiliary power units
- Refrigeration
- Stationary applications
- Auxiliary power units
- Trucks
- Stationary applications
- Storage
- Underground Storage
Technical Committee:ISO/TC 197ISO 26142:2010 defines the performance requirements and test methods of hydrogen detection apparatus that is designed to measure and monitor hydrogen concentrations in stationary applications.
-
IEC 62282-3-100:2019 Fuel cell technologies - Part 3-100: Stationary fuel cell power systemsx
IEC 62282-3-100:2019
Title of Standard: Fuel cell technologies - Part 3-100: Stationary fuel cell power systems
Status of Standard: Published
Description : IEC 62282-3-100:2019 applies to stationary packaged, self-contained fuel cell power systems or fuel cell power systems comprised of factory matched packages of integrated systems which generate electricity through electrochemical reactions.
Direct link to this standard, and more information
Responsible Technical Committee: IEC/TC 105
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Stationary applications
- Auxiliary power units
- Aircraft
- Stationary applications
- Stationary Fuel Cells
- Backup power / genset
- Stationary applications
- Stationary Fuel Cells
- CHP
- Stationary applications
- Auxiliary power units
- Maritime
- Stationary applications
- Auxiliary power units
- Military
- Stationary applications
- Auxiliary power units
- Other APU
- Stationary applications
- Stationary Fuel Cells
- Other stationary
- Stationary applications
- Stationary Fuel Cells
- Prime power
- Stationary applications
- Auxiliary power units
- Refrigeration
Technical Committee:IEC/TC 105IEC 62282-3-100:2019 applies to stationary packaged, self-contained fuel cell power systems or fuel cell power systems comprised of factory matched packages of integrated systems which generate electricity through electrochemical reactions. -
ISO 26142:2010 Hydrogen detection apparatus -- Stationary applicationsx
ISO 26142:2010
Title of Standard: Hydrogen detection apparatus -- Stationary applications
Status of Standard: Published
Description : ISO 26142:2010 defines the performance requirements and test methods of hydrogen detection apparatus that is designed to measure and monitor hydrogen concentrations in stationary applications.
Direct link to this standard, and more information
Responsible Technical Committee: ISO/TC 197
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Stationary applications
- Auxiliary power units
- Aircraft
- Stationary applications
- Stationary Fuel Cells
- Backup power / genset
- Stationary applications
- Stationary Fuel Cells
- CHP
- Stationary applications
- Storage
- Cylinder Storage
- Stationary applications
- Auxiliary power units
- Maritime
- Stationary applications
- Auxiliary power units
- Military
- Stationary applications
- Auxiliary power units
- Other APU
- Stationary applications
- Stationary Fuel Cells
- Other stationary
- Stationary applications
- Stationary Fuel Cells
- Prime power
- Stationary applications
- Auxiliary power units
- Refrigeration
- Stationary applications
- Auxiliary power units
- Trucks
- Stationary applications
- Storage
- Underground Storage
Technical Committee:ISO/TC 197ISO 26142:2010 defines the performance requirements and test methods of hydrogen detection apparatus that is designed to measure and monitor hydrogen concentrations in stationary applications.
-
IEC 62282-3-100:2019 Fuel cell technologies - Part 3-100: Stationary fuel cell power systemsx
IEC 62282-3-100:2019
Title of Standard: Fuel cell technologies - Part 3-100: Stationary fuel cell power systems
Status of Standard: Published
Description : IEC 62282-3-100:2019 applies to stationary packaged, self-contained fuel cell power systems or fuel cell power systems comprised of factory matched packages of integrated systems which generate electricity through electrochemical reactions.
Direct link to this standard, and more information
Responsible Technical Committee: IEC/TC 105
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Stationary applications
- Auxiliary power units
- Aircraft
- Stationary applications
- Stationary Fuel Cells
- Backup power / genset
- Stationary applications
- Stationary Fuel Cells
- CHP
- Stationary applications
- Auxiliary power units
- Maritime
- Stationary applications
- Auxiliary power units
- Military
- Stationary applications
- Auxiliary power units
- Other APU
- Stationary applications
- Stationary Fuel Cells
- Other stationary
- Stationary applications
- Stationary Fuel Cells
- Prime power
- Stationary applications
- Auxiliary power units
- Refrigeration
Technical Committee:IEC/TC 105IEC 62282-3-100:2019 applies to stationary packaged, self-contained fuel cell power systems or fuel cell power systems comprised of factory matched packages of integrated systems which generate electricity through electrochemical reactions. -
ISO 26142:2010 Hydrogen detection apparatus -- Stationary applicationsx
ISO 26142:2010
Title of Standard: Hydrogen detection apparatus -- Stationary applications
Status of Standard: Published
Description : ISO 26142:2010 defines the performance requirements and test methods of hydrogen detection apparatus that is designed to measure and monitor hydrogen concentrations in stationary applications.
Direct link to this standard, and more information
Responsible Technical Committee: ISO/TC 197
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Stationary applications
- Auxiliary power units
- Aircraft
- Stationary applications
- Stationary Fuel Cells
- Backup power / genset
- Stationary applications
- Stationary Fuel Cells
- CHP
- Stationary applications
- Storage
- Cylinder Storage
- Stationary applications
- Auxiliary power units
- Maritime
- Stationary applications
- Auxiliary power units
- Military
- Stationary applications
- Auxiliary power units
- Other APU
- Stationary applications
- Stationary Fuel Cells
- Other stationary
- Stationary applications
- Stationary Fuel Cells
- Prime power
- Stationary applications
- Auxiliary power units
- Refrigeration
- Stationary applications
- Auxiliary power units
- Trucks
- Stationary applications
- Storage
- Underground Storage
Technical Committee:ISO/TC 197ISO 26142:2010 defines the performance requirements and test methods of hydrogen detection apparatus that is designed to measure and monitor hydrogen concentrations in stationary applications.
-
IEC 62282-3-100:2019 Fuel cell technologies - Part 3-100: Stationary fuel cell power systemsx
IEC 62282-3-100:2019
Title of Standard: Fuel cell technologies - Part 3-100: Stationary fuel cell power systems
Status of Standard: Published
Description : IEC 62282-3-100:2019 applies to stationary packaged, self-contained fuel cell power systems or fuel cell power systems comprised of factory matched packages of integrated systems which generate electricity through electrochemical reactions.
Direct link to this standard, and more information
Responsible Technical Committee: IEC/TC 105
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Stationary applications
- Auxiliary power units
- Aircraft
- Stationary applications
- Stationary Fuel Cells
- Backup power / genset
- Stationary applications
- Stationary Fuel Cells
- CHP
- Stationary applications
- Auxiliary power units
- Maritime
- Stationary applications
- Auxiliary power units
- Military
- Stationary applications
- Auxiliary power units
- Other APU
- Stationary applications
- Stationary Fuel Cells
- Other stationary
- Stationary applications
- Stationary Fuel Cells
- Prime power
- Stationary applications
- Auxiliary power units
- Refrigeration
Technical Committee:IEC/TC 105IEC 62282-3-100:2019 applies to stationary packaged, self-contained fuel cell power systems or fuel cell power systems comprised of factory matched packages of integrated systems which generate electricity through electrochemical reactions. -
ISO 26142:2010 Hydrogen detection apparatus -- Stationary applicationsx
ISO 26142:2010
Title of Standard: Hydrogen detection apparatus -- Stationary applications
Status of Standard: Published
Description : ISO 26142:2010 defines the performance requirements and test methods of hydrogen detection apparatus that is designed to measure and monitor hydrogen concentrations in stationary applications.
Direct link to this standard, and more information
Responsible Technical Committee: ISO/TC 197
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Stationary applications
- Auxiliary power units
- Aircraft
- Stationary applications
- Stationary Fuel Cells
- Backup power / genset
- Stationary applications
- Stationary Fuel Cells
- CHP
- Stationary applications
- Storage
- Cylinder Storage
- Stationary applications
- Auxiliary power units
- Maritime
- Stationary applications
- Auxiliary power units
- Military
- Stationary applications
- Auxiliary power units
- Other APU
- Stationary applications
- Stationary Fuel Cells
- Other stationary
- Stationary applications
- Stationary Fuel Cells
- Prime power
- Stationary applications
- Auxiliary power units
- Refrigeration
- Stationary applications
- Auxiliary power units
- Trucks
- Stationary applications
- Storage
- Underground Storage
Technical Committee:ISO/TC 197ISO 26142:2010 defines the performance requirements and test methods of hydrogen detection apparatus that is designed to measure and monitor hydrogen concentrations in stationary applications.
-
EN 13645:2001 Installations and equipment for liquefied natural gas - Design of onshore installations with a storage capacity between 5 t and 200 tx
EN 13645:2001
Title of Standard: Installations and equipment for liquefied natural gas - Design of onshore installations with a storage capacity between 5 t and 200 t
Status of Standard: Published
Description : This European Standard specifies requirements for the design and construction of onshore stationary liquefied natural gas (LNG) installations with a total storage capacity between 5 t and 200 t.
Direct link to this standard, and more information
Responsible Technical Committee: CEN/TC 282
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Stationary applications
- Storage
- Cylinder Storage
Technical Committee:CEN/TC 282This European Standard specifies requirements for the design and construction of onshore stationary liquefied natural gas (LNG) installations with a total storage capacity between 5 t and 200 t. -
EN 1473:2016 Installation and equipment for liquefied natural gas - Design of onshore installationsx
EN 1473:2016
Title of Standard: Installation and equipment for liquefied natural gas - Design of onshore installations
Status of Standard: Published
Description : This European Standard gives guidelines for the design, construction and operation of all onshore liquefied natural gas (LNG) installations for the liquefaction, storage, vaporization, transfer and handling of LNG.
Direct link to this standard, and more information
Responsible Technical Committee: CEN/TC 282
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Stationary applications
- Storage
- Cylinder Storage
- Infrastructure
- Other Infrastructure
- Infrastructure
- Pipelines
Technical Committee:CEN/TC 282This European Standard gives guidelines for the design, construction and operation of all onshore liquefied natural gas (LNG) installations for the liquefaction, storage, vaporization, transfer and handling of LNG. -
EN ISO 9809-1:2010 Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPax
EN ISO 9809-1:2010
Title of Standard: Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa
Status of Standard: Published
Description : ISO 9809-1:2010 specifies minimum requirements for the material, design, construction and workmanship, manufacturing processes, examination and testing at manufacture of refillable quenched and tempered seamless steel gas cylinders of water capacities from 0,5 l up to and including 150 l for compressed, liquefied and dissolved gases.
Direct link to this standard, and more information
Responsible Technical Committee: CEN/TC 23
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Portable applications
- Storage
- Cylinder Storage
- Stationary applications
- Storage
- Cylinder Storage
- Portable applications
- Storage
- Underground Storage
Technical Committee:CEN/TC 23ISO 9809-1:2010 specifies minimum requirements for the material, design, construction and workmanship, manufacturing processes, examination and testing at manufacture of refillable quenched and tempered seamless steel gas cylinders of water capacities from 0,5 l up to and including 150 l for compressed, liquefied and dissolved gases. -
IEC 62282-8-101:2020 ED1 Fuel cell technologies - Part 8-101: Energy storage systems using fuel cell modules in reverse mode - Test procedures for solid oxide single cell and stack performance including reversible operationx
IEC 62282-8-101:2020 ED1
Title of Standard: Fuel cell technologies - Part 8-101: Energy storage systems using fuel cell modules in reverse mode - Test procedures for solid oxide single cell and stack performance including reversible operation
Status of Standard: Published
Description : IEC 62282-8-101 addresses solid oxide cell (SOC) and stack assembly unit(s). It providesfor testing systems, instruments and measuring methods to test the performance of SOCcell/stack assembly units for energy storage purposes.
Direct link to this standard, and more information
Responsible Technical Committee: IEC/TC 105
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Stationary applications
- Storage
- Cylinder Storage
- Stationary applications
- Stationary Fuel Cells
- Prime power
Technical Committee:IEC/TC 105IEC 62282-8-101 addresses solid oxide cell (SOC) and stack assembly unit(s). It providesfor testing systems, instruments and measuring methods to test the performance of SOCcell/stack assembly units for energy storage purposes. -
IEC 62282-8-201:2020 ED1 Fuel cell technologies - Part 8-201: Energy storage systems using fuel cell modules in reverse mode - Power-to-power systems - Test procedures for the performance of power-to-power systemsx
IEC 62282-8-201:2020 ED1
Title of Standard: Fuel cell technologies - Part 8-201: Energy storage systems using fuel cell modules in reverse mode - Power-to-power systems - Test procedures for the performance of power-to-power systems
Status of Standard: Published
Description : IEC 62282-8-101 addresses solid oxide cell (SOC) and stack assembly unit(s). It providesfor testing systems, instruments and measuring methods to test the performance of SOCcell/stack assembly units for energy storage purposes.
Direct link to this standard, and more information
Responsible Technical Committee: IEC/TC 105
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Stationary applications
- Storage
- Cylinder Storage
- Stationary applications
- Stationary Fuel Cells
- Prime power
Technical Committee:IEC/TC 105IEC 62282-8-101 addresses solid oxide cell (SOC) and stack assembly unit(s). It providesfor testing systems, instruments and measuring methods to test the performance of SOCcell/stack assembly units for energy storage purposes. -
IEC 62932-1:2020 Flow battery energy systems for stationary applications - Part 1: Terminology and general aspectsx
IEC 62932-1:2020
Title of Standard: Flow battery energy systems for stationary applications - Part 1: Terminology and general aspects
Status of Standard: Published
Description : IEC 62932-1:2020 relates to flow battery energy systems (FBES) used in electrical energy storage (EES) applications and provides the main terminology and general aspects of this technology, including terms necessary for the definition of unit parameters, test methods, safety and environmental issues.
Direct link to this standard, and more information
Responsible Technical Committee: IEC/TC 21
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Stationary applications
- Storage
- Cylinder Storage
- Stationary applications
- Storage
- Underground Storage
Technical Committee:IEC/TC 21IEC 62932-1:2020 relates to flow battery energy systems (FBES) used in electrical energy storage (EES) applications and provides the main terminology and general aspects of this technology, including terms necessary for the definition of unit parameters, test methods, safety and environmental issues. -
ISO 11114-1 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materialsx
ISO 11114-1
Title of Standard: Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materials
Status of Standard: Published
Description : This standard provides requirements for the selection and evaluation of compatibility between metallic gas cylinder and valve materials, and the gas content.
Direct link to this standard, and more information
Responsible Technical Committee:
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Stationary applications
- Storage
- Cylinder Storage
Technical Committee:This standard provides requirements for the selection and evaluation of compatibility between metallic gas cylinder and valve materials, and the gas content. -
ISO 11114-3:2010 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 3: Autogenous ignition test for non-metallic materials in oxygen atmospherex
ISO 11114-3:2010
Title of Standard: Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 3: Autogenous ignition test for non-metallic materials in oxygen atmosphere
Status of Standard: Published
Description : This part of ISO 11114 specifies a test method to determine the autogenous ignition temperature of non-metallic materials in pressurized gaseous oxygen.
Direct link to this standard, and more information
Responsible Technical Committee:
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Stationary applications
- Storage
- Cylinder Storage
Technical Committee:This part of ISO 11114 specifies a test method to determine the autogenous ignition temperature of non-metallic materials in pressurized gaseous oxygen. -
ISO 13985:2006 Liquid hydrogen -- Land vehicle fuel tanksx
ISO 13985:2006
Title of Standard: Liquid hydrogen -- Land vehicle fuel tanks
Status of Standard: Published
Description : ISO 13985:2006 specifies the construction requirements for refillable fuel tanks for liquid hydrogen used in land vehicles as well as the testing methods required to ensure that a reasonable level of protection from loss of life and property resulting from fire and explosion is provided.
Direct link to this standard, and more information
Responsible Technical Committee: ISO/TC 197
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Stationary applications
- Storage
- Cylinder Storage
- Stationary applications
- Storage
- Underground Storage
Technical Committee:ISO/TC 197ISO 13985:2006 specifies the construction requirements for refillable fuel tanks for liquid hydrogen used in land vehicles as well as the testing methods required to ensure that a reasonable level of protection from loss of life and property resulting from fire and explosion is provided. -
ISO 17268:2020 Gaseous hydrogen land vehicle refuelling connection devicesx
ISO 17268:2020
Title of Standard: Gaseous hydrogen land vehicle refuelling connection devices
Status of Standard: Published
Description : ISO 17268:2020 defines the design, safety and operation characteristics of gaseous hydrogen land vehicle (GHLV) refuelling connectors.
Direct link to this standard, and more information
Responsible Technical Committee: ISO/TC 197
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Stationary applications
- Storage
- Cylinder Storage
- Infrastructure
- HRSs
Technical Committee:ISO/TC 197ISO 17268:2020 defines the design, safety and operation characteristics of gaseous hydrogen land vehicle (GHLV) refuelling connectors. -
ISO 19881:2018 Gaseous hydrogen -- Land vehicle fuel containersx
ISO 19881:2018
Title of Standard: Gaseous hydrogen -- Land vehicle fuel containers
Status of Standard: Published
Description : This document contains requirements for the material, design, manufacture, marking and testing of serially produced, refillable containers intended only for the storage of compressed hydrogen gas for land vehicle operation.
Direct link to this standard, and more information
Responsible Technical Committee: ISO/TC 197
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Stationary applications
- Storage
- Cylinder Storage
Technical Committee:ISO/TC 197This document contains requirements for the material, design, manufacture, marking and testing of serially produced, refillable containers intended only for the storage of compressed hydrogen gas for land vehicle operation. -
ISO 19882:2018 Gaseous hydrogen -- Thermally activated pressure relief devices for compressed hydrogen vehicle fuel containersx
ISO 19882:2018
Title of Standard: Gaseous hydrogen -- Thermally activated pressure relief devices for compressed hydrogen vehicle fuel containers
Status of Standard: Published
Description : This document establishes minimum requirements for pressure relief devices intended for use on hydrogen fuelled vehicle fuel containers that comply with ISO 19881, IEC 62282-4-101, ANSI HGV 2, CSA B51 Part 2, EC79/EU406, SAE J2579, or the UN GTR No. 13.
Direct link to this standard, and more information
Responsible Technical Committee: ISO/TC 197
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Stationary applications
- Storage
- Cylinder Storage
Technical Committee:ISO/TC 197This document establishes minimum requirements for pressure relief devices intended for use on hydrogen fuelled vehicle fuel containers that comply with ISO 19881, IEC 62282-4-101, ANSI HGV 2, CSA B51 Part 2, EC79/EU406, SAE J2579, or the UN GTR No. 13. -
ISO 26142:2010 Hydrogen detection apparatus -- Stationary applicationsx
ISO 26142:2010
Title of Standard: Hydrogen detection apparatus -- Stationary applications
Status of Standard: Published
Description : ISO 26142:2010 defines the performance requirements and test methods of hydrogen detection apparatus that is designed to measure and monitor hydrogen concentrations in stationary applications.
Direct link to this standard, and more information
Responsible Technical Committee: ISO/TC 197
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Stationary applications
- Auxiliary power units
- Aircraft
- Stationary applications
- Stationary Fuel Cells
- Backup power / genset
- Stationary applications
- Stationary Fuel Cells
- CHP
- Stationary applications
- Storage
- Cylinder Storage
- Stationary applications
- Auxiliary power units
- Maritime
- Stationary applications
- Auxiliary power units
- Military
- Stationary applications
- Auxiliary power units
- Other APU
- Stationary applications
- Stationary Fuel Cells
- Other stationary
- Stationary applications
- Stationary Fuel Cells
- Prime power
- Stationary applications
- Auxiliary power units
- Refrigeration
- Stationary applications
- Auxiliary power units
- Trucks
- Stationary applications
- Storage
- Underground Storage
Technical Committee:ISO/TC 197ISO 26142:2010 defines the performance requirements and test methods of hydrogen detection apparatus that is designed to measure and monitor hydrogen concentrations in stationary applications. -
ISO/CD 11114-2 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materialsx
ISO/CD 11114-2
Title of Standard: Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials
Status of Standard: Under development
Description : This part of ISO 11114 gives guidance in the selection and evaluation of compatibility between non-metallic materials for gas cylinders and valves and the gas contents.
Direct link to this standard, and more information
Responsible Technical Committee:
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Stationary applications
- Storage
- Cylinder Storage
Technical Committee:This part of ISO 11114 gives guidance in the selection and evaluation of compatibility between non-metallic materials for gas cylinders and valves and the gas contents.
-
IEC 62932-1:2020 Flow battery energy systems for stationary applications - Part 1: Terminology and general aspectsx
IEC 62932-1:2020
Title of Standard: Flow battery energy systems for stationary applications - Part 1: Terminology and general aspects
Status of Standard: Published
Description : IEC 62932-1:2020 relates to flow battery energy systems (FBES) used in electrical energy storage (EES) applications and provides the main terminology and general aspects of this technology, including terms necessary for the definition of unit parameters, test methods, safety and environmental issues.
Direct link to this standard, and more information
Responsible Technical Committee: IEC/TC 21
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Stationary applications
- Storage
- Cylinder Storage
- Stationary applications
- Storage
- Underground Storage
Technical Committee:IEC/TC 21IEC 62932-1:2020 relates to flow battery energy systems (FBES) used in electrical energy storage (EES) applications and provides the main terminology and general aspects of this technology, including terms necessary for the definition of unit parameters, test methods, safety and environmental issues. -
ISO 13985:2006 Liquid hydrogen -- Land vehicle fuel tanksx
ISO 13985:2006
Title of Standard: Liquid hydrogen -- Land vehicle fuel tanks
Status of Standard: Published
Description : ISO 13985:2006 specifies the construction requirements for refillable fuel tanks for liquid hydrogen used in land vehicles as well as the testing methods required to ensure that a reasonable level of protection from loss of life and property resulting from fire and explosion is provided.
Direct link to this standard, and more information
Responsible Technical Committee: ISO/TC 197
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Stationary applications
- Storage
- Cylinder Storage
- Stationary applications
- Storage
- Underground Storage
Technical Committee:ISO/TC 197ISO 13985:2006 specifies the construction requirements for refillable fuel tanks for liquid hydrogen used in land vehicles as well as the testing methods required to ensure that a reasonable level of protection from loss of life and property resulting from fire and explosion is provided. -
ISO 26142:2010 Hydrogen detection apparatus -- Stationary applicationsx
ISO 26142:2010
Title of Standard: Hydrogen detection apparatus -- Stationary applications
Status of Standard: Published
Description : ISO 26142:2010 defines the performance requirements and test methods of hydrogen detection apparatus that is designed to measure and monitor hydrogen concentrations in stationary applications.
Direct link to this standard, and more information
Responsible Technical Committee: ISO/TC 197
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Stationary applications
- Auxiliary power units
- Aircraft
- Stationary applications
- Stationary Fuel Cells
- Backup power / genset
- Stationary applications
- Stationary Fuel Cells
- CHP
- Stationary applications
- Storage
- Cylinder Storage
- Stationary applications
- Auxiliary power units
- Maritime
- Stationary applications
- Auxiliary power units
- Military
- Stationary applications
- Auxiliary power units
- Other APU
- Stationary applications
- Stationary Fuel Cells
- Other stationary
- Stationary applications
- Stationary Fuel Cells
- Prime power
- Stationary applications
- Auxiliary power units
- Refrigeration
- Stationary applications
- Auxiliary power units
- Trucks
- Stationary applications
- Storage
- Underground Storage
Technical Committee:ISO/TC 197ISO 26142:2010 defines the performance requirements and test methods of hydrogen detection apparatus that is designed to measure and monitor hydrogen concentrations in stationary applications.
-
ISO 16111:2018 Transportable gas storage devices -- Hydrogen absorbed in reversible metal hydridex
ISO 16111:2018
Title of Standard: Transportable gas storage devices -- Hydrogen absorbed in reversible metal hydride
Status of Standard: Published
Description : "This document defines the requirements applicable to the material, design, construction, and testing of transportable hydrogen gas storage systems, referred to as ""metal hydride assemblies"" (MH assemblies) which utilize shells not exceeding 150 l internal volume and having a maximum developed pressure (MDP) not exceeding 25 MPa."
Direct link to this standard, and more information
Responsible Technical Committee: ISO/TC 197
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Portable applications
- Storage
Technical Committee:ISO/TC 197"This document defines the requirements applicable to the material, design, construction, and testing of transportable hydrogen gas storage systems, referred to as ""metal hydride assemblies"" (MH assemblies) which utilize shells not exceeding 150 l internal volume and having a maximum developed pressure (MDP) not exceeding 25 MPa."
-
EN 12245:2009+A1:2011 Transportable gas cylinders - Fully wrapped composite cylindersx
EN 12245:2009+A1:2011
Title of Standard: Transportable gas cylinders - Fully wrapped composite cylinders
Status of Standard: Published
Description : This European Standard specifies minimum requirements for the materials, design, construction, prototype testing and routine manufacturing inspections of composite gas cylinders for compressed, liquefied and dissolved gases.
Direct link to this standard, and more information
Responsible Technical Committee: CEN/TC 23
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Portable applications
- Storage
- Cylinder Storage
- Portable applications
- Storage
- Underground Storage
Technical Committee:CEN/TC 23This European Standard specifies minimum requirements for the materials, design, construction, prototype testing and routine manufacturing inspections of composite gas cylinders for compressed, liquefied and dissolved gases. -
EN ISO 11114-4:2017 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4: Test methods for selecting steels resistant to hydrogen embrittlementx
EN ISO 11114-4:2017
Title of Standard: Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4: Test methods for selecting steels resistant to hydrogen embrittlement
Status of Standard: Published
Description : ISO 11114-4: 2017 specifies test methods and the evaluation of results from these tests in order to qualify steels suitable for use in the manufacture of gas cylinders (up to 3 000 l) for hydrogen and hydrogen bearing embrittling gases.
Direct link to this standard, and more information
Responsible Technical Committee: CEN/TC 23
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Portable applications
- Storage
- Cylinder Storage
- Portable applications
- Storage
- Underground Storage
Technical Committee:CEN/TC 23ISO 11114-4: 2017 specifies test methods and the evaluation of results from these tests in order to qualify steels suitable for use in the manufacture of gas cylinders (up to 3 000 l) for hydrogen and hydrogen bearing embrittling gases. -
EN ISO 9809-1:2010 Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPax
EN ISO 9809-1:2010
Title of Standard: Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa
Status of Standard: Published
Description : ISO 9809-1:2010 specifies minimum requirements for the material, design, construction and workmanship, manufacturing processes, examination and testing at manufacture of refillable quenched and tempered seamless steel gas cylinders of water capacities from 0,5 l up to and including 150 l for compressed, liquefied and dissolved gases.
Direct link to this standard, and more information
Responsible Technical Committee: CEN/TC 23
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Portable applications
- Storage
- Cylinder Storage
- Stationary applications
- Storage
- Cylinder Storage
- Portable applications
- Storage
- Underground Storage
Technical Committee:CEN/TC 23ISO 9809-1:2010 specifies minimum requirements for the material, design, construction and workmanship, manufacturing processes, examination and testing at manufacture of refillable quenched and tempered seamless steel gas cylinders of water capacities from 0,5 l up to and including 150 l for compressed, liquefied and dissolved gases. -
ISO 11119-1:2012 Gas cylinders -- Refillable composite gas cylinders and tubes -- Design, construction and testing -- Part 1: Hoop wrapped fibre reinforced composite gas cylinders and tubes up to 450 lx
ISO 11119-1:2012
Title of Standard: Gas cylinders -- Refillable composite gas cylinders and tubes -- Design, construction and testing -- Part 1: Hoop wrapped fibre reinforced composite gas cylinders and tubes up to 450 l
Status of Standard: Published
Description : ISO 11119-1:2012 specifies requirements for composite gas cylinders and tubes between 0,5 l and 450 l water capacity, for the storage and conveyance of compressed or liquefied gases.
Direct link to this standard, and more information
Responsible Technical Committee: ISO/TC 58
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Portable applications
- Storage
- Cylinder Storage
- Portable applications
- Storage
- Underground Storage
Technical Committee:ISO/TC 58ISO 11119-1:2012 specifies requirements for composite gas cylinders and tubes between 0,5 l and 450 l water capacity, for the storage and conveyance of compressed or liquefied gases. -
ISO 11119-2:2012 Gas cylinders -- Refillable composite gas cylinders and tubes -- Design, construction and testing -- Part 2: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with load-sharing metal linersx
ISO 11119-2:2012
Title of Standard: Gas cylinders -- Refillable composite gas cylinders and tubes -- Design, construction and testing -- Part 2: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with load-sharing metal liners
Status of Standard: Published
Description : ISO 11119-2:2012 specifies requirements for composite gas cylinders and tubes between 0,5 l and 450 l water capacity, for the storage and conveyance of compressed or liquefied gases.
Direct link to this standard, and more information
Responsible Technical Committee: ISO/TC 58
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Portable applications
- Storage
- Cylinder Storage
- Portable applications
- Storage
- Underground Storage
Technical Committee:ISO/TC 58ISO 11119-2:2012 specifies requirements for composite gas cylinders and tubes between 0,5 l and 450 l water capacity, for the storage and conveyance of compressed or liquefied gases. -
ISO 11119-3:2013 Gas cylinders -- Refillable composite gas cylinders and tubes -- Design, construction and testing -- Part 3: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450L with non-load-sharing metallic or non-metallic linersx
ISO 11119-3:2013
Title of Standard: Gas cylinders -- Refillable composite gas cylinders and tubes -- Design, construction and testing -- Part 3: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450L with non-load-sharing metallic or non-metallic liners
Status of Standard: Published
Description : ISO 11119-3:2013 specifies requirements for composite gas cylinders up to 150 l water capacity and composite tubes above 150 l water capacity and up to 450 l water capacity, for the storage and conveyance of compressed or liquefied gases.
Direct link to this standard, and more information
Responsible Technical Committee: ISO/TC 58
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Portable applications
- Storage
- Cylinder Storage
- Portable applications
- Storage
- Underground Storage
Technical Committee:ISO/TC 58ISO 11119-3:2013 specifies requirements for composite gas cylinders up to 150 l water capacity and composite tubes above 150 l water capacity and up to 450 l water capacity, for the storage and conveyance of compressed or liquefied gases. -
ISO 11119-4:2016 Gas cylinders -- Refillable composite gas cylinders -- Design, construction and testing -- Part 4: Fully wrapped fibre reinforced composite gas cylinders up to 150 l with load-sharing welded metallic linersx
ISO 11119-4:2016
Title of Standard: Gas cylinders -- Refillable composite gas cylinders -- Design, construction and testing -- Part 4: Fully wrapped fibre reinforced composite gas cylinders up to 150 l with load-sharing welded metallic liners
Status of Standard: Published
Description : ISO 11119-4:2016 specifies requirements for composite gas cylinders with load-sharing welded liners between 0,5 l and 150 l water capacity and a maximum test pressure of 450 bar for the storage and conveyance of compressed or liquefied gases.
Direct link to this standard, and more information
Responsible Technical Committee: ISO/TC 58
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Portable applications
- Storage
- Cylinder Storage
- Portable applications
- Storage
- Underground Storage
Technical Committee:ISO/TC 58ISO 11119-4:2016 specifies requirements for composite gas cylinders with load-sharing welded liners between 0,5 l and 150 l water capacity and a maximum test pressure of 450 bar for the storage and conveyance of compressed or liquefied gases. -
ISO 11515:2013 Gas cylinders -- Refillable composite reinforced tubes of water capacity between 450 L and 3000 L -- Design, construction and testingx
ISO 11515:2013
Title of Standard: Gas cylinders -- Refillable composite reinforced tubes of water capacity between 450 L and 3000 L -- Design, construction and testing
Status of Standard: Published
Description : ISO 11515:2013 specifies minimum requirements for the design, construction and performance testing of composite reinforced tubes between 450 l and 3 000 l water capacity, for transport, storage and use of compressed or liquefied gases with test pressures up to and including 1600 bar with a design life of at least 15 years and less than or equal to 30 years. The expected service temperatures are between -40 øC and +65 øC.
Direct link to this standard, and more information
Responsible Technical Committee: ISO/TC 58
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Portable applications
- Storage
- Cylinder Storage
- Portable applications
- Storage
- Underground Storage
Technical Committee:ISO/TC 58ISO 11515:2013 specifies minimum requirements for the design, construction and performance testing of composite reinforced tubes between 450 l and 3 000 l water capacity, for transport, storage and use of compressed or liquefied gases with test pressures up to and including 1600 bar with a design life of at least 15 years and less than or equal to 30 years. The expected service temperatures are between -40 øC and +65 øC. -
ISO/ TS 17519:2019 Gas cylinders -- Refillable permanently mounted composite tubes for transportationx
ISO/ TS 17519:2019
Title of Standard: Gas cylinders -- Refillable permanently mounted composite tubes for transportation
Status of Standard: Published
Description : ISO/TS 17519 specifies the minimum requirements for the material, design construction and workmanship, manufacturing processes, examination and testing at time of manufacture of an assembly of permanently mounted composite tube(s) in a frame with associated components.
Direct link to this standard, and more information
Responsible Technical Committee: ISO/TC 58
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Portable applications
- Storage
- Cylinder Storage
- Portable applications
- Storage
- Underground Storage
Technical Committee:ISO/TC 58ISO/TS 17519 specifies the minimum requirements for the material, design construction and workmanship, manufacturing processes, examination and testing at time of manufacture of an assembly of permanently mounted composite tube(s) in a frame with associated components. -
prEN ISO 11114-1 rev Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materialsx
prEN ISO 11114-1 rev
Title of Standard: Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materials
Status of Standard: Under Approval
Description : This document provides requirements for the selection of safe combinations of metallic cylinder and valve materials and cylinder gas content.
Direct link to this standard, and more information
Responsible Technical Committee: CEN/TC 23
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Portable applications
- Storage
- Cylinder Storage
- Portable applications
- Storage
- Underground Storage
Technical Committee:CEN/TC 23This document provides requirements for the selection of safe combinations of metallic cylinder and valve materials and cylinder gas content.
-
EN 12245:2009+A1:2011 Transportable gas cylinders - Fully wrapped composite cylindersx
EN 12245:2009+A1:2011
Title of Standard: Transportable gas cylinders - Fully wrapped composite cylinders
Status of Standard: Published
Description : This European Standard specifies minimum requirements for the materials, design, construction, prototype testing and routine manufacturing inspections of composite gas cylinders for compressed, liquefied and dissolved gases.
Direct link to this standard, and more information
Responsible Technical Committee: CEN/TC 23
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Portable applications
- Storage
- Cylinder Storage
- Portable applications
- Storage
- Underground Storage
Technical Committee:CEN/TC 23This European Standard specifies minimum requirements for the materials, design, construction, prototype testing and routine manufacturing inspections of composite gas cylinders for compressed, liquefied and dissolved gases. -
EN ISO 11114-4:2017 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4: Test methods for selecting steels resistant to hydrogen embrittlementx
EN ISO 11114-4:2017
Title of Standard: Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4: Test methods for selecting steels resistant to hydrogen embrittlement
Status of Standard: Published
Description : ISO 11114-4: 2017 specifies test methods and the evaluation of results from these tests in order to qualify steels suitable for use in the manufacture of gas cylinders (up to 3 000 l) for hydrogen and hydrogen bearing embrittling gases.
Direct link to this standard, and more information
Responsible Technical Committee: CEN/TC 23
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Portable applications
- Storage
- Cylinder Storage
- Portable applications
- Storage
- Underground Storage
Technical Committee:CEN/TC 23ISO 11114-4: 2017 specifies test methods and the evaluation of results from these tests in order to qualify steels suitable for use in the manufacture of gas cylinders (up to 3 000 l) for hydrogen and hydrogen bearing embrittling gases. -
EN ISO 9809-1:2010 Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPax
EN ISO 9809-1:2010
Title of Standard: Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa
Status of Standard: Published
Description : ISO 9809-1:2010 specifies minimum requirements for the material, design, construction and workmanship, manufacturing processes, examination and testing at manufacture of refillable quenched and tempered seamless steel gas cylinders of water capacities from 0,5 l up to and including 150 l for compressed, liquefied and dissolved gases.
Direct link to this standard, and more information
Responsible Technical Committee: CEN/TC 23
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Portable applications
- Storage
- Cylinder Storage
- Stationary applications
- Storage
- Cylinder Storage
- Portable applications
- Storage
- Underground Storage
Technical Committee:CEN/TC 23ISO 9809-1:2010 specifies minimum requirements for the material, design, construction and workmanship, manufacturing processes, examination and testing at manufacture of refillable quenched and tempered seamless steel gas cylinders of water capacities from 0,5 l up to and including 150 l for compressed, liquefied and dissolved gases. -
ISO 11119-1:2012 Gas cylinders -- Refillable composite gas cylinders and tubes -- Design, construction and testing -- Part 1: Hoop wrapped fibre reinforced composite gas cylinders and tubes up to 450 lx
ISO 11119-1:2012
Title of Standard: Gas cylinders -- Refillable composite gas cylinders and tubes -- Design, construction and testing -- Part 1: Hoop wrapped fibre reinforced composite gas cylinders and tubes up to 450 l
Status of Standard: Published
Description : ISO 11119-1:2012 specifies requirements for composite gas cylinders and tubes between 0,5 l and 450 l water capacity, for the storage and conveyance of compressed or liquefied gases.
Direct link to this standard, and more information
Responsible Technical Committee: ISO/TC 58
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Portable applications
- Storage
- Cylinder Storage
- Portable applications
- Storage
- Underground Storage
Technical Committee:ISO/TC 58ISO 11119-1:2012 specifies requirements for composite gas cylinders and tubes between 0,5 l and 450 l water capacity, for the storage and conveyance of compressed or liquefied gases. -
ISO 11119-2:2012 Gas cylinders -- Refillable composite gas cylinders and tubes -- Design, construction and testing -- Part 2: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with load-sharing metal linersx
ISO 11119-2:2012
Title of Standard: Gas cylinders -- Refillable composite gas cylinders and tubes -- Design, construction and testing -- Part 2: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with load-sharing metal liners
Status of Standard: Published
Description : ISO 11119-2:2012 specifies requirements for composite gas cylinders and tubes between 0,5 l and 450 l water capacity, for the storage and conveyance of compressed or liquefied gases.
Direct link to this standard, and more information
Responsible Technical Committee: ISO/TC 58
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Portable applications
- Storage
- Cylinder Storage
- Portable applications
- Storage
- Underground Storage
Technical Committee:ISO/TC 58ISO 11119-2:2012 specifies requirements for composite gas cylinders and tubes between 0,5 l and 450 l water capacity, for the storage and conveyance of compressed or liquefied gases. -
ISO 11119-3:2013 Gas cylinders -- Refillable composite gas cylinders and tubes -- Design, construction and testing -- Part 3: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450L with non-load-sharing metallic or non-metallic linersx
ISO 11119-3:2013
Title of Standard: Gas cylinders -- Refillable composite gas cylinders and tubes -- Design, construction and testing -- Part 3: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450L with non-load-sharing metallic or non-metallic liners
Status of Standard: Published
Description : ISO 11119-3:2013 specifies requirements for composite gas cylinders up to 150 l water capacity and composite tubes above 150 l water capacity and up to 450 l water capacity, for the storage and conveyance of compressed or liquefied gases.
Direct link to this standard, and more information
Responsible Technical Committee: ISO/TC 58
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Portable applications
- Storage
- Cylinder Storage
- Portable applications
- Storage
- Underground Storage
Technical Committee:ISO/TC 58ISO 11119-3:2013 specifies requirements for composite gas cylinders up to 150 l water capacity and composite tubes above 150 l water capacity and up to 450 l water capacity, for the storage and conveyance of compressed or liquefied gases. -
ISO 11119-4:2016 Gas cylinders -- Refillable composite gas cylinders -- Design, construction and testing -- Part 4: Fully wrapped fibre reinforced composite gas cylinders up to 150 l with load-sharing welded metallic linersx
ISO 11119-4:2016
Title of Standard: Gas cylinders -- Refillable composite gas cylinders -- Design, construction and testing -- Part 4: Fully wrapped fibre reinforced composite gas cylinders up to 150 l with load-sharing welded metallic liners
Status of Standard: Published
Description : ISO 11119-4:2016 specifies requirements for composite gas cylinders with load-sharing welded liners between 0,5 l and 150 l water capacity and a maximum test pressure of 450 bar for the storage and conveyance of compressed or liquefied gases.
Direct link to this standard, and more information
Responsible Technical Committee: ISO/TC 58
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Portable applications
- Storage
- Cylinder Storage
- Portable applications
- Storage
- Underground Storage
Technical Committee:ISO/TC 58ISO 11119-4:2016 specifies requirements for composite gas cylinders with load-sharing welded liners between 0,5 l and 150 l water capacity and a maximum test pressure of 450 bar for the storage and conveyance of compressed or liquefied gases. -
ISO 11515:2013 Gas cylinders -- Refillable composite reinforced tubes of water capacity between 450 L and 3000 L -- Design, construction and testingx
ISO 11515:2013
Title of Standard: Gas cylinders -- Refillable composite reinforced tubes of water capacity between 450 L and 3000 L -- Design, construction and testing
Status of Standard: Published
Description : ISO 11515:2013 specifies minimum requirements for the design, construction and performance testing of composite reinforced tubes between 450 l and 3 000 l water capacity, for transport, storage and use of compressed or liquefied gases with test pressures up to and including 1600 bar with a design life of at least 15 years and less than or equal to 30 years. The expected service temperatures are between -40 øC and +65 øC.
Direct link to this standard, and more information
Responsible Technical Committee: ISO/TC 58
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Portable applications
- Storage
- Cylinder Storage
- Portable applications
- Storage
- Underground Storage
Technical Committee:ISO/TC 58ISO 11515:2013 specifies minimum requirements for the design, construction and performance testing of composite reinforced tubes between 450 l and 3 000 l water capacity, for transport, storage and use of compressed or liquefied gases with test pressures up to and including 1600 bar with a design life of at least 15 years and less than or equal to 30 years. The expected service temperatures are between -40 øC and +65 øC. -
ISO/ TS 17519:2019 Gas cylinders -- Refillable permanently mounted composite tubes for transportationx
ISO/ TS 17519:2019
Title of Standard: Gas cylinders -- Refillable permanently mounted composite tubes for transportation
Status of Standard: Published
Description : ISO/TS 17519 specifies the minimum requirements for the material, design construction and workmanship, manufacturing processes, examination and testing at time of manufacture of an assembly of permanently mounted composite tube(s) in a frame with associated components.
Direct link to this standard, and more information
Responsible Technical Committee: ISO/TC 58
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Portable applications
- Storage
- Cylinder Storage
- Portable applications
- Storage
- Underground Storage
Technical Committee:ISO/TC 58ISO/TS 17519 specifies the minimum requirements for the material, design construction and workmanship, manufacturing processes, examination and testing at time of manufacture of an assembly of permanently mounted composite tube(s) in a frame with associated components. -
prEN ISO 11114-1 rev Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materialsx
prEN ISO 11114-1 rev
Title of Standard: Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materials
Status of Standard: Under Approval
Description : This document provides requirements for the selection of safe combinations of metallic cylinder and valve materials and cylinder gas content.
Direct link to this standard, and more information
Responsible Technical Committee: CEN/TC 23
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Portable applications
- Storage
- Cylinder Storage
- Portable applications
- Storage
- Underground Storage
Technical Committee:CEN/TC 23This document provides requirements for the selection of safe combinations of metallic cylinder and valve materials and cylinder gas content.
-
IEC 62282-6-101 ED1 Fuel cell technologies - Part 6-101: Micro fuel cell power systems - Safety - General requirementsx
IEC 62282-6-101 ED1
Title of Standard: Fuel cell technologies - Part 6-101: Micro fuel cell power systems - Safety - General requirements
Status of Standard: UnderDevelopment
Description : N.A.
Direct link to this standard, and more information
Responsible Technical Committee: IEC/TC 105
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Portable applications
- Other portable
Technical Committee:IEC/TC 105 -
ISO 11114-4:2017 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4: Test methods for selecting steels resistant to hydrogen embrittlementx
ISO 11114-4:2017
Title of Standard: Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4: Test methods for selecting steels resistant to hydrogen embrittlement
Status of Standard: Published
Description : ISO 11114-4 specifies test methods and the evaluation of results from these tests in order to qualify steels suitable for use in the manufacture of gas cylinders (up to 3 000 l) for hydrogen and hydrogen bearing embrittling gases.
Direct link to this standard, and more information
Responsible Technical Committee:
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Portable applications
- Other portable
Technical Committee:ISO 11114-4 specifies test methods and the evaluation of results from these tests in order to qualify steels suitable for use in the manufacture of gas cylinders (up to 3 000 l) for hydrogen and hydrogen bearing embrittling gases.
-
EN 17124:2018 Hydrogen fuel - Product specification and quality assurance - Proton exchange membrane (PEM) fuel cell applications for Road Vehiclesx
EN 17124:2018
Title of Standard: Hydrogen fuel - Product specification and quality assurance - Proton exchange membrane (PEM) fuel cell applications for Road Vehicles
Status of Standard: Published
Description : This document specifies the quality characteristics of hydrogen fuel and the corresponding quality assurance in order to ensure uniformity of the hydrogen product as dispensed for utilization in proton exchange membrane (PEM) fuel cell road vehicle systems.
Direct link to this standard, and more information
Responsible Technical Committee: ISO/TC 268
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Hydrogen generation
- Electrolysers
- AEL
- Hydrogen generation
- Electrolysers
- Other
- Hydrogen generation
- Electrolysers
- PEMEL
- Hydrogen generation
- Electrolysers
- SOEL
- Hydrogen generation
- Other hydrogen generation
- Hydrogen generation
- Small scale thermochemical
Technical Committee:ISO/TC 268This document specifies the quality characteristics of hydrogen fuel and the corresponding quality assurance in order to ensure uniformity of the hydrogen product as dispensed for utilization in proton exchange membrane (PEM) fuel cell road vehicle systems. -
EN ISO 15848-1:2015/A1:2017 Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 1: Classification system and qualification procedures for type testing of valves - Amendment 1x
EN ISO 15848-1:2015/A1:2017
Title of Standard: Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 1: Classification system and qualification procedures for type testing of valves - Amendment 1
Status of Standard: Published
Description : Specifies testing procedures for evaluation of external leakage of valve stem seals (or shaft) and body joints of isolating valves and control valves intended for application in volatile air pollutants and hazardous fluids.
Direct link to this standard, and more information
Responsible Technical Committee: CEN/TC 69
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Hydrogen generation
- Electrolysers
- AEL
- Hydrogen generation
- Electrolysers
- Other
- Hydrogen generation
- Electrolysers
- PEMEL
- Hydrogen generation
- Electrolysers
- SOEL
- Infrastructure
- HRSs
- Infrastructure
- Other Infrastructure
- Hydrogen generation
- Other hydrogen generation
- Infrastructure
- Pipelines
- Hydrogen generation
- Small scale thermochemical
Technical Committee:CEN/TC 69Specifies testing procedures for evaluation of external leakage of valve stem seals (or shaft) and body joints of isolating valves and control valves intended for application in volatile air pollutants and hazardous fluids. -
EN ISO 15848-2:2015 Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 2: Production acceptance test of valvesx
EN ISO 15848-2:2015
Title of Standard: Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 2: Production acceptance test of valves
Status of Standard: Published
Description : Specifies test procedures for the evaluation of external leakage of valve stems or shafts and body joints of isolating valves and control valves intended for application with volatile air pollutants and hazardous fluids.
Direct link to this standard, and more information
Responsible Technical Committee: CEN/TC 69
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Hydrogen generation
- Electrolysers
- AEL
- Hydrogen generation
- Electrolysers
- Other
- Hydrogen generation
- Electrolysers
- PEMEL
- Hydrogen generation
- Electrolysers
- SOEL
- Infrastructure
- HRSs
- Hydrogen generation
- Other hydrogen generation
- Infrastructure
- Other Infrastructure
- Infrastructure
- Pipelines
- Hydrogen generation
- Small scale thermochemical
Technical Committee:CEN/TC 69Specifies test procedures for the evaluation of external leakage of valve stems or shafts and body joints of isolating valves and control valves intended for application with volatile air pollutants and hazardous fluids. -
IEC 62282-2-100 ED1 Fuel cell technologies ? Part 2-100: Fuel cell modules ? Safetyx
IEC 62282-2-100 ED1
Title of Standard: Fuel cell technologies ? Part 2-100: Fuel cell modules ? Safety
Status of Standard: UnderDevelopment
Description : This part of IEC 62282 provides the minimum requirements for safety and performance of fuel cell modules and applies to fuel cell modules with the following electrolyte chemistry: alkaline, polymer electrolyte (including direct methanol fuel cells)1, phosphoric acid, molten carbonate, solid oxide, aqueous solution of salts. Fuel cell modules can be provided with or without an enclosure and can be operated at significant pressurization levels or close to ambient pressure.
Direct link to this standard, and more information
Responsible Technical Committee: IEC/TC 105
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Hydrogen generation
- Electrolysers
- AEL
- Hydrogen generation
- Electrolysers
- Other
- Hydrogen generation
- Electrolysers
- SOEL
Technical Committee:IEC/TC 105This part of IEC 62282 provides the minimum requirements for safety and performance of fuel cell modules and applies to fuel cell modules with the following electrolyte chemistry: alkaline, polymer electrolyte (including direct methanol fuel cells)1, phosphoric acid, molten carbonate, solid oxide, aqueous solution of salts. Fuel cell modules can be provided with or without an enclosure and can be operated at significant pressurization levels or close to ambient pressure. -
ISO 13734:2013 Natural gas -- Organic components used as odorants -- Requirements and test methodsx
ISO 13734:2013
Title of Standard: Natural gas -- Organic components used as odorants -- Requirements and test methods
Status of Standard: Published
Description : ISO 13734,2013 specifies requirements and test methods for organic compounds suitable for odorization of natural gas and natural gas substitutes for public gas supply, hereafter referred to as odorants.
Direct link to this standard, and more information
Responsible Technical Committee: ISO/TC 193
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Hydrogen generation
- Electrolysers
- AEL
- Hydrogen generation
- Electrolysers
- Other
- Hydrogen generation
- Electrolysers
- PEMEL
- Hydrogen generation
- Electrolysers
- SOEL
- Hydrogen generation
- Other hydrogen generation
- Hydrogen generation
- Small scale thermochemical
Technical Committee:ISO/TC 193ISO 13734,2013 specifies requirements and test methods for organic compounds suitable for odorization of natural gas and natural gas substitutes for public gas supply, hereafter referred to as odorants.
-
EN 17124:2018 Hydrogen fuel - Product specification and quality assurance - Proton exchange membrane (PEM) fuel cell applications for Road Vehiclesx
EN 17124:2018
Title of Standard: Hydrogen fuel - Product specification and quality assurance - Proton exchange membrane (PEM) fuel cell applications for Road Vehicles
Status of Standard: Published
Description : This document specifies the quality characteristics of hydrogen fuel and the corresponding quality assurance in order to ensure uniformity of the hydrogen product as dispensed for utilization in proton exchange membrane (PEM) fuel cell road vehicle systems.
Direct link to this standard, and more information
Responsible Technical Committee: ISO/TC 268
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Hydrogen generation
- Electrolysers
- AEL
- Hydrogen generation
- Electrolysers
- Other
- Hydrogen generation
- Electrolysers
- PEMEL
- Hydrogen generation
- Electrolysers
- SOEL
- Hydrogen generation
- Other hydrogen generation
- Hydrogen generation
- Small scale thermochemical
Technical Committee:ISO/TC 268This document specifies the quality characteristics of hydrogen fuel and the corresponding quality assurance in order to ensure uniformity of the hydrogen product as dispensed for utilization in proton exchange membrane (PEM) fuel cell road vehicle systems. -
EN ISO 15848-1:2015/A1:2017 Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 1: Classification system and qualification procedures for type testing of valves - Amendment 1x
EN ISO 15848-1:2015/A1:2017
Title of Standard: Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 1: Classification system and qualification procedures for type testing of valves - Amendment 1
Status of Standard: Published
Description : Specifies testing procedures for evaluation of external leakage of valve stem seals (or shaft) and body joints of isolating valves and control valves intended for application in volatile air pollutants and hazardous fluids.
Direct link to this standard, and more information
Responsible Technical Committee: CEN/TC 69
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Hydrogen generation
- Electrolysers
- AEL
- Hydrogen generation
- Electrolysers
- Other
- Hydrogen generation
- Electrolysers
- PEMEL
- Hydrogen generation
- Electrolysers
- SOEL
- Infrastructure
- HRSs
- Infrastructure
- Other Infrastructure
- Hydrogen generation
- Other hydrogen generation
- Infrastructure
- Pipelines
- Hydrogen generation
- Small scale thermochemical
Technical Committee:CEN/TC 69Specifies testing procedures for evaluation of external leakage of valve stem seals (or shaft) and body joints of isolating valves and control valves intended for application in volatile air pollutants and hazardous fluids. -
EN ISO 15848-2:2015 Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 2: Production acceptance test of valvesx
EN ISO 15848-2:2015
Title of Standard: Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 2: Production acceptance test of valves
Status of Standard: Published
Description : Specifies test procedures for the evaluation of external leakage of valve stems or shafts and body joints of isolating valves and control valves intended for application with volatile air pollutants and hazardous fluids.
Direct link to this standard, and more information
Responsible Technical Committee: CEN/TC 69
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Hydrogen generation
- Electrolysers
- AEL
- Hydrogen generation
- Electrolysers
- Other
- Hydrogen generation
- Electrolysers
- PEMEL
- Hydrogen generation
- Electrolysers
- SOEL
- Infrastructure
- HRSs
- Hydrogen generation
- Other hydrogen generation
- Infrastructure
- Other Infrastructure
- Infrastructure
- Pipelines
- Hydrogen generation
- Small scale thermochemical
Technical Committee:CEN/TC 69Specifies test procedures for the evaluation of external leakage of valve stems or shafts and body joints of isolating valves and control valves intended for application with volatile air pollutants and hazardous fluids. -
IEC 62282-2-100 ED1 Fuel cell technologies ? Part 2-100: Fuel cell modules ? Safetyx
IEC 62282-2-100 ED1
Title of Standard: Fuel cell technologies ? Part 2-100: Fuel cell modules ? Safety
Status of Standard: UnderDevelopment
Description : This part of IEC 62282 provides the minimum requirements for safety and performance of fuel cell modules and applies to fuel cell modules with the following electrolyte chemistry: alkaline, polymer electrolyte (including direct methanol fuel cells)1, phosphoric acid, molten carbonate, solid oxide, aqueous solution of salts. Fuel cell modules can be provided with or without an enclosure and can be operated at significant pressurization levels or close to ambient pressure.
Direct link to this standard, and more information
Responsible Technical Committee: IEC/TC 105
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Hydrogen generation
- Electrolysers
- AEL
- Hydrogen generation
- Electrolysers
- Other
- Hydrogen generation
- Electrolysers
- SOEL
Technical Committee:IEC/TC 105This part of IEC 62282 provides the minimum requirements for safety and performance of fuel cell modules and applies to fuel cell modules with the following electrolyte chemistry: alkaline, polymer electrolyte (including direct methanol fuel cells)1, phosphoric acid, molten carbonate, solid oxide, aqueous solution of salts. Fuel cell modules can be provided with or without an enclosure and can be operated at significant pressurization levels or close to ambient pressure. -
ISO 13734:2013 Natural gas -- Organic components used as odorants -- Requirements and test methodsx
ISO 13734:2013
Title of Standard: Natural gas -- Organic components used as odorants -- Requirements and test methods
Status of Standard: Published
Description : ISO 13734,2013 specifies requirements and test methods for organic compounds suitable for odorization of natural gas and natural gas substitutes for public gas supply, hereafter referred to as odorants.
Direct link to this standard, and more information
Responsible Technical Committee: ISO/TC 193
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Hydrogen generation
- Electrolysers
- AEL
- Hydrogen generation
- Electrolysers
- Other
- Hydrogen generation
- Electrolysers
- PEMEL
- Hydrogen generation
- Electrolysers
- SOEL
- Hydrogen generation
- Other hydrogen generation
- Hydrogen generation
- Small scale thermochemical
Technical Committee:ISO/TC 193ISO 13734,2013 specifies requirements and test methods for organic compounds suitable for odorization of natural gas and natural gas substitutes for public gas supply, hereafter referred to as odorants. -
ISO 22734:2019 Hydrogen generators using water electrolysis - Industrial, commercial, and residential applicationsx
ISO 22734:2019
Title of Standard: Hydrogen generators using water electrolysis - Industrial, commercial, and residential applications
Status of Standard: Published
Description : This document defines the construction, safety, and performance requirements of modular or factory-matched hydrogen gas generation appliances, herein referred to as hydrogen generators, using electrochemical reactions to electrolyse water to produce hydrogen.
Direct link to this standard, and more information
Responsible Technical Committee: ISO/TC 197
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Hydrogen generation
- Electrolysers
- Other
- Hydrogen generation
- Electrolysers
- Other
- Hydrogen generation
- Electrolysers
- PEMEL
- Hydrogen generation
- Electrolysers
- PEMEL
- Hydrogen generation
- Electrolysers
- SOEL
- Hydrogen generation
- Electrolysers
- SOEL
Technical Committee:ISO/TC 197This document defines the construction, safety, and performance requirements of modular or factory-matched hydrogen gas generation appliances, herein referred to as hydrogen generators, using electrochemical reactions to electrolyse water to produce hydrogen. -
ISO 22734:2019 Hydrogen generators using water electrolysis - Industrial, commercial, and residential applicationsx
ISO 22734:2019
Title of Standard: Hydrogen generators using water electrolysis - Industrial, commercial, and residential applications
Status of Standard: Published
Description : This document defines the construction, safety, and performance requirements of modular or factory-matched hydrogen gas generation appliances, herein referred to as hydrogen generators, using electrochemical reactions to electrolyse water to produce hydrogen.
Direct link to this standard, and more information
Responsible Technical Committee: ISO/TC 197
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Hydrogen generation
- Electrolysers
- Other
- Hydrogen generation
- Electrolysers
- Other
- Hydrogen generation
- Electrolysers
- PEMEL
- Hydrogen generation
- Electrolysers
- PEMEL
- Hydrogen generation
- Electrolysers
- SOEL
- Hydrogen generation
- Electrolysers
- SOEL
Technical Committee:ISO/TC 197This document defines the construction, safety, and performance requirements of modular or factory-matched hydrogen gas generation appliances, herein referred to as hydrogen generators, using electrochemical reactions to electrolyse water to produce hydrogen.
-
EN 17124:2018 Hydrogen fuel - Product specification and quality assurance - Proton exchange membrane (PEM) fuel cell applications for Road Vehiclesx
EN 17124:2018
Title of Standard: Hydrogen fuel - Product specification and quality assurance - Proton exchange membrane (PEM) fuel cell applications for Road Vehicles
Status of Standard: Published
Description : This document specifies the quality characteristics of hydrogen fuel and the corresponding quality assurance in order to ensure uniformity of the hydrogen product as dispensed for utilization in proton exchange membrane (PEM) fuel cell road vehicle systems.
Direct link to this standard, and more information
Responsible Technical Committee: ISO/TC 268
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Hydrogen generation
- Electrolysers
- AEL
- Hydrogen generation
- Electrolysers
- Other
- Hydrogen generation
- Electrolysers
- PEMEL
- Hydrogen generation
- Electrolysers
- SOEL
- Hydrogen generation
- Other hydrogen generation
- Hydrogen generation
- Small scale thermochemical
Technical Committee:ISO/TC 268This document specifies the quality characteristics of hydrogen fuel and the corresponding quality assurance in order to ensure uniformity of the hydrogen product as dispensed for utilization in proton exchange membrane (PEM) fuel cell road vehicle systems. -
EN ISO 15848-1:2015/A1:2017 Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 1: Classification system and qualification procedures for type testing of valves - Amendment 1x
EN ISO 15848-1:2015/A1:2017
Title of Standard: Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 1: Classification system and qualification procedures for type testing of valves - Amendment 1
Status of Standard: Published
Description : Specifies testing procedures for evaluation of external leakage of valve stem seals (or shaft) and body joints of isolating valves and control valves intended for application in volatile air pollutants and hazardous fluids.
Direct link to this standard, and more information
Responsible Technical Committee: CEN/TC 69
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Hydrogen generation
- Electrolysers
- AEL
- Hydrogen generation
- Electrolysers
- Other
- Hydrogen generation
- Electrolysers
- PEMEL
- Hydrogen generation
- Electrolysers
- SOEL
- Infrastructure
- HRSs
- Infrastructure
- Other Infrastructure
- Hydrogen generation
- Other hydrogen generation
- Infrastructure
- Pipelines
- Hydrogen generation
- Small scale thermochemical
Technical Committee:CEN/TC 69Specifies testing procedures for evaluation of external leakage of valve stem seals (or shaft) and body joints of isolating valves and control valves intended for application in volatile air pollutants and hazardous fluids. -
EN ISO 15848-2:2015 Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 2: Production acceptance test of valvesx
EN ISO 15848-2:2015
Title of Standard: Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 2: Production acceptance test of valves
Status of Standard: Published
Description : Specifies test procedures for the evaluation of external leakage of valve stems or shafts and body joints of isolating valves and control valves intended for application with volatile air pollutants and hazardous fluids.
Direct link to this standard, and more information
Responsible Technical Committee: CEN/TC 69
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Hydrogen generation
- Electrolysers
- AEL
- Hydrogen generation
- Electrolysers
- Other
- Hydrogen generation
- Electrolysers
- PEMEL
- Hydrogen generation
- Electrolysers
- SOEL
- Infrastructure
- HRSs
- Hydrogen generation
- Other hydrogen generation
- Infrastructure
- Other Infrastructure
- Infrastructure
- Pipelines
- Hydrogen generation
- Small scale thermochemical
Technical Committee:CEN/TC 69Specifies test procedures for the evaluation of external leakage of valve stems or shafts and body joints of isolating valves and control valves intended for application with volatile air pollutants and hazardous fluids. -
ISO 13734:2013 Natural gas -- Organic components used as odorants -- Requirements and test methodsx
ISO 13734:2013
Title of Standard: Natural gas -- Organic components used as odorants -- Requirements and test methods
Status of Standard: Published
Description : ISO 13734,2013 specifies requirements and test methods for organic compounds suitable for odorization of natural gas and natural gas substitutes for public gas supply, hereafter referred to as odorants.
Direct link to this standard, and more information
Responsible Technical Committee: ISO/TC 193
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Hydrogen generation
- Electrolysers
- AEL
- Hydrogen generation
- Electrolysers
- Other
- Hydrogen generation
- Electrolysers
- PEMEL
- Hydrogen generation
- Electrolysers
- SOEL
- Hydrogen generation
- Other hydrogen generation
- Hydrogen generation
- Small scale thermochemical
Technical Committee:ISO/TC 193ISO 13734,2013 specifies requirements and test methods for organic compounds suitable for odorization of natural gas and natural gas substitutes for public gas supply, hereafter referred to as odorants. -
ISO 14687:2019 Hydrogen fuel quality - Product specificationx
ISO 14687:2019
Title of Standard: Hydrogen fuel quality - Product specification
Status of Standard: Published
Description : This document specifies the minimum quality characteristics of hydrogen fuel as distributed for utilization in vehicular and stationary applications.
Direct link to this standard, and more information
Responsible Technical Committee: ISO/TC 197
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Hydrogen generation
- Electrolysers
- PEMEL
Technical Committee:ISO/TC 197This document specifies the minimum quality characteristics of hydrogen fuel as distributed for utilization in vehicular and stationary applications. -
ISO 22734:2019 Hydrogen generators using water electrolysis - Industrial, commercial, and residential applicationsx
ISO 22734:2019
Title of Standard: Hydrogen generators using water electrolysis - Industrial, commercial, and residential applications
Status of Standard: Published
Description : This document defines the construction, safety, and performance requirements of modular or factory-matched hydrogen gas generation appliances, herein referred to as hydrogen generators, using electrochemical reactions to electrolyse water to produce hydrogen.
Direct link to this standard, and more information
Responsible Technical Committee: ISO/TC 197
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Hydrogen generation
- Electrolysers
- Other
- Hydrogen generation
- Electrolysers
- Other
- Hydrogen generation
- Electrolysers
- PEMEL
- Hydrogen generation
- Electrolysers
- PEMEL
- Hydrogen generation
- Electrolysers
- SOEL
- Hydrogen generation
- Electrolysers
- SOEL
Technical Committee:ISO/TC 197This document defines the construction, safety, and performance requirements of modular or factory-matched hydrogen gas generation appliances, herein referred to as hydrogen generators, using electrochemical reactions to electrolyse water to produce hydrogen. -
ISO 22734:2019 Hydrogen generators using water electrolysis - Industrial, commercial, and residential applicationsx
ISO 22734:2019
Title of Standard: Hydrogen generators using water electrolysis - Industrial, commercial, and residential applications
Status of Standard: Published
Description : This document defines the construction, safety, and performance requirements of modular or factory-matched hydrogen gas generation appliances, herein referred to as hydrogen generators, using electrochemical reactions to electrolyse water to produce hydrogen.
Direct link to this standard, and more information
Responsible Technical Committee: ISO/TC 197
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Hydrogen generation
- Electrolysers
- Other
- Hydrogen generation
- Electrolysers
- Other
- Hydrogen generation
- Electrolysers
- PEMEL
- Hydrogen generation
- Electrolysers
- PEMEL
- Hydrogen generation
- Electrolysers
- SOEL
- Hydrogen generation
- Electrolysers
- SOEL
Technical Committee:ISO/TC 197This document defines the construction, safety, and performance requirements of modular or factory-matched hydrogen gas generation appliances, herein referred to as hydrogen generators, using electrochemical reactions to electrolyse water to produce hydrogen.
-
EN 17124:2018 Hydrogen fuel - Product specification and quality assurance - Proton exchange membrane (PEM) fuel cell applications for Road Vehiclesx
EN 17124:2018
Title of Standard: Hydrogen fuel - Product specification and quality assurance - Proton exchange membrane (PEM) fuel cell applications for Road Vehicles
Status of Standard: Published
Description : This document specifies the quality characteristics of hydrogen fuel and the corresponding quality assurance in order to ensure uniformity of the hydrogen product as dispensed for utilization in proton exchange membrane (PEM) fuel cell road vehicle systems.
Direct link to this standard, and more information
Responsible Technical Committee: ISO/TC 268
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Hydrogen generation
- Electrolysers
- AEL
- Hydrogen generation
- Electrolysers
- Other
- Hydrogen generation
- Electrolysers
- PEMEL
- Hydrogen generation
- Electrolysers
- SOEL
- Hydrogen generation
- Other hydrogen generation
- Hydrogen generation
- Small scale thermochemical
Technical Committee:ISO/TC 268This document specifies the quality characteristics of hydrogen fuel and the corresponding quality assurance in order to ensure uniformity of the hydrogen product as dispensed for utilization in proton exchange membrane (PEM) fuel cell road vehicle systems. -
EN ISO 15848-1:2015/A1:2017 Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 1: Classification system and qualification procedures for type testing of valves - Amendment 1x
EN ISO 15848-1:2015/A1:2017
Title of Standard: Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 1: Classification system and qualification procedures for type testing of valves - Amendment 1
Status of Standard: Published
Description : Specifies testing procedures for evaluation of external leakage of valve stem seals (or shaft) and body joints of isolating valves and control valves intended for application in volatile air pollutants and hazardous fluids.
Direct link to this standard, and more information
Responsible Technical Committee: CEN/TC 69
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Hydrogen generation
- Electrolysers
- AEL
- Hydrogen generation
- Electrolysers
- Other
- Hydrogen generation
- Electrolysers
- PEMEL
- Hydrogen generation
- Electrolysers
- SOEL
- Infrastructure
- HRSs
- Infrastructure
- Other Infrastructure
- Hydrogen generation
- Other hydrogen generation
- Infrastructure
- Pipelines
- Hydrogen generation
- Small scale thermochemical
Technical Committee:CEN/TC 69Specifies testing procedures for evaluation of external leakage of valve stem seals (or shaft) and body joints of isolating valves and control valves intended for application in volatile air pollutants and hazardous fluids. -
EN ISO 15848-2:2015 Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 2: Production acceptance test of valvesx
EN ISO 15848-2:2015
Title of Standard: Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 2: Production acceptance test of valves
Status of Standard: Published
Description : Specifies test procedures for the evaluation of external leakage of valve stems or shafts and body joints of isolating valves and control valves intended for application with volatile air pollutants and hazardous fluids.
Direct link to this standard, and more information
Responsible Technical Committee: CEN/TC 69
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Hydrogen generation
- Electrolysers
- AEL
- Hydrogen generation
- Electrolysers
- Other
- Hydrogen generation
- Electrolysers
- PEMEL
- Hydrogen generation
- Electrolysers
- SOEL
- Infrastructure
- HRSs
- Hydrogen generation
- Other hydrogen generation
- Infrastructure
- Other Infrastructure
- Infrastructure
- Pipelines
- Hydrogen generation
- Small scale thermochemical
Technical Committee:CEN/TC 69Specifies test procedures for the evaluation of external leakage of valve stems or shafts and body joints of isolating valves and control valves intended for application with volatile air pollutants and hazardous fluids. -
IEC 62282-2-100 ED1 Fuel cell technologies ? Part 2-100: Fuel cell modules ? Safetyx
IEC 62282-2-100 ED1
Title of Standard: Fuel cell technologies ? Part 2-100: Fuel cell modules ? Safety
Status of Standard: UnderDevelopment
Description : This part of IEC 62282 provides the minimum requirements for safety and performance of fuel cell modules and applies to fuel cell modules with the following electrolyte chemistry: alkaline, polymer electrolyte (including direct methanol fuel cells)1, phosphoric acid, molten carbonate, solid oxide, aqueous solution of salts. Fuel cell modules can be provided with or without an enclosure and can be operated at significant pressurization levels or close to ambient pressure.
Direct link to this standard, and more information
Responsible Technical Committee: IEC/TC 105
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Hydrogen generation
- Electrolysers
- AEL
- Hydrogen generation
- Electrolysers
- Other
- Hydrogen generation
- Electrolysers
- SOEL
Technical Committee:IEC/TC 105This part of IEC 62282 provides the minimum requirements for safety and performance of fuel cell modules and applies to fuel cell modules with the following electrolyte chemistry: alkaline, polymer electrolyte (including direct methanol fuel cells)1, phosphoric acid, molten carbonate, solid oxide, aqueous solution of salts. Fuel cell modules can be provided with or without an enclosure and can be operated at significant pressurization levels or close to ambient pressure. -
ISO 13734:2013 Natural gas -- Organic components used as odorants -- Requirements and test methodsx
ISO 13734:2013
Title of Standard: Natural gas -- Organic components used as odorants -- Requirements and test methods
Status of Standard: Published
Description : ISO 13734,2013 specifies requirements and test methods for organic compounds suitable for odorization of natural gas and natural gas substitutes for public gas supply, hereafter referred to as odorants.
Direct link to this standard, and more information
Responsible Technical Committee: ISO/TC 193
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Hydrogen generation
- Electrolysers
- AEL
- Hydrogen generation
- Electrolysers
- Other
- Hydrogen generation
- Electrolysers
- PEMEL
- Hydrogen generation
- Electrolysers
- SOEL
- Hydrogen generation
- Other hydrogen generation
- Hydrogen generation
- Small scale thermochemical
Technical Committee:ISO/TC 193ISO 13734,2013 specifies requirements and test methods for organic compounds suitable for odorization of natural gas and natural gas substitutes for public gas supply, hereafter referred to as odorants. -
ISO 22734:2019 Hydrogen generators using water electrolysis - Industrial, commercial, and residential applicationsx
ISO 22734:2019
Title of Standard: Hydrogen generators using water electrolysis - Industrial, commercial, and residential applications
Status of Standard: Published
Description : This document defines the construction, safety, and performance requirements of modular or factory-matched hydrogen gas generation appliances, herein referred to as hydrogen generators, using electrochemical reactions to electrolyse water to produce hydrogen.
Direct link to this standard, and more information
Responsible Technical Committee: ISO/TC 197
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Hydrogen generation
- Electrolysers
- Other
- Hydrogen generation
- Electrolysers
- Other
- Hydrogen generation
- Electrolysers
- PEMEL
- Hydrogen generation
- Electrolysers
- PEMEL
- Hydrogen generation
- Electrolysers
- SOEL
- Hydrogen generation
- Electrolysers
- SOEL
Technical Committee:ISO/TC 197This document defines the construction, safety, and performance requirements of modular or factory-matched hydrogen gas generation appliances, herein referred to as hydrogen generators, using electrochemical reactions to electrolyse water to produce hydrogen. -
ISO 22734:2019 Hydrogen generators using water electrolysis - Industrial, commercial, and residential applicationsx
ISO 22734:2019
Title of Standard: Hydrogen generators using water electrolysis - Industrial, commercial, and residential applications
Status of Standard: Published
Description : This document defines the construction, safety, and performance requirements of modular or factory-matched hydrogen gas generation appliances, herein referred to as hydrogen generators, using electrochemical reactions to electrolyse water to produce hydrogen.
Direct link to this standard, and more information
Responsible Technical Committee: ISO/TC 197
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Hydrogen generation
- Electrolysers
- Other
- Hydrogen generation
- Electrolysers
- Other
- Hydrogen generation
- Electrolysers
- PEMEL
- Hydrogen generation
- Electrolysers
- PEMEL
- Hydrogen generation
- Electrolysers
- SOEL
- Hydrogen generation
- Electrolysers
- SOEL
Technical Committee:ISO/TC 197This document defines the construction, safety, and performance requirements of modular or factory-matched hydrogen gas generation appliances, herein referred to as hydrogen generators, using electrochemical reactions to electrolyse water to produce hydrogen.
-
EN 17124:2018 Hydrogen fuel - Product specification and quality assurance - Proton exchange membrane (PEM) fuel cell applications for Road Vehiclesx
EN 17124:2018
Title of Standard: Hydrogen fuel - Product specification and quality assurance - Proton exchange membrane (PEM) fuel cell applications for Road Vehicles
Status of Standard: Published
Description : This document specifies the quality characteristics of hydrogen fuel and the corresponding quality assurance in order to ensure uniformity of the hydrogen product as dispensed for utilization in proton exchange membrane (PEM) fuel cell road vehicle systems.
Direct link to this standard, and more information
Responsible Technical Committee: ISO/TC 268
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Hydrogen generation
- Electrolysers
- AEL
- Hydrogen generation
- Electrolysers
- Other
- Hydrogen generation
- Electrolysers
- PEMEL
- Hydrogen generation
- Electrolysers
- SOEL
- Hydrogen generation
- Other hydrogen generation
- Hydrogen generation
- Small scale thermochemical
Technical Committee:ISO/TC 268This document specifies the quality characteristics of hydrogen fuel and the corresponding quality assurance in order to ensure uniformity of the hydrogen product as dispensed for utilization in proton exchange membrane (PEM) fuel cell road vehicle systems. -
EN ISO 15848-1:2015/A1:2017 Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 1: Classification system and qualification procedures for type testing of valves - Amendment 1x
EN ISO 15848-1:2015/A1:2017
Title of Standard: Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 1: Classification system and qualification procedures for type testing of valves - Amendment 1
Status of Standard: Published
Description : Specifies testing procedures for evaluation of external leakage of valve stem seals (or shaft) and body joints of isolating valves and control valves intended for application in volatile air pollutants and hazardous fluids.
Direct link to this standard, and more information
Responsible Technical Committee: CEN/TC 69
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Hydrogen generation
- Electrolysers
- AEL
- Hydrogen generation
- Electrolysers
- Other
- Hydrogen generation
- Electrolysers
- PEMEL
- Hydrogen generation
- Electrolysers
- SOEL
- Infrastructure
- HRSs
- Infrastructure
- Other Infrastructure
- Hydrogen generation
- Other hydrogen generation
- Infrastructure
- Pipelines
- Hydrogen generation
- Small scale thermochemical
Technical Committee:CEN/TC 69Specifies testing procedures for evaluation of external leakage of valve stem seals (or shaft) and body joints of isolating valves and control valves intended for application in volatile air pollutants and hazardous fluids. -
EN ISO 15848-2:2015 Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 2: Production acceptance test of valvesx
EN ISO 15848-2:2015
Title of Standard: Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 2: Production acceptance test of valves
Status of Standard: Published
Description : Specifies test procedures for the evaluation of external leakage of valve stems or shafts and body joints of isolating valves and control valves intended for application with volatile air pollutants and hazardous fluids.
Direct link to this standard, and more information
Responsible Technical Committee: CEN/TC 69
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Hydrogen generation
- Electrolysers
- AEL
- Hydrogen generation
- Electrolysers
- Other
- Hydrogen generation
- Electrolysers
- PEMEL
- Hydrogen generation
- Electrolysers
- SOEL
- Infrastructure
- HRSs
- Hydrogen generation
- Other hydrogen generation
- Infrastructure
- Other Infrastructure
- Infrastructure
- Pipelines
- Hydrogen generation
- Small scale thermochemical
Technical Committee:CEN/TC 69Specifies test procedures for the evaluation of external leakage of valve stems or shafts and body joints of isolating valves and control valves intended for application with volatile air pollutants and hazardous fluids. -
ISO 13734:2013 Natural gas -- Organic components used as odorants -- Requirements and test methodsx
ISO 13734:2013
Title of Standard: Natural gas -- Organic components used as odorants -- Requirements and test methods
Status of Standard: Published
Description : ISO 13734,2013 specifies requirements and test methods for organic compounds suitable for odorization of natural gas and natural gas substitutes for public gas supply, hereafter referred to as odorants.
Direct link to this standard, and more information
Responsible Technical Committee: ISO/TC 193
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Hydrogen generation
- Electrolysers
- AEL
- Hydrogen generation
- Electrolysers
- Other
- Hydrogen generation
- Electrolysers
- PEMEL
- Hydrogen generation
- Electrolysers
- SOEL
- Hydrogen generation
- Other hydrogen generation
- Hydrogen generation
- Small scale thermochemical
Technical Committee:ISO/TC 193ISO 13734,2013 specifies requirements and test methods for organic compounds suitable for odorization of natural gas and natural gas substitutes for public gas supply, hereafter referred to as odorants.
-
EN 17124:2018 Hydrogen fuel - Product specification and quality assurance - Proton exchange membrane (PEM) fuel cell applications for Road Vehiclesx
EN 17124:2018
Title of Standard: Hydrogen fuel - Product specification and quality assurance - Proton exchange membrane (PEM) fuel cell applications for Road Vehicles
Status of Standard: Published
Description : This document specifies the quality characteristics of hydrogen fuel and the corresponding quality assurance in order to ensure uniformity of the hydrogen product as dispensed for utilization in proton exchange membrane (PEM) fuel cell road vehicle systems.
Direct link to this standard, and more information
Responsible Technical Committee: ISO/TC 268
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Hydrogen generation
- Electrolysers
- AEL
- Hydrogen generation
- Electrolysers
- Other
- Hydrogen generation
- Electrolysers
- PEMEL
- Hydrogen generation
- Electrolysers
- SOEL
- Hydrogen generation
- Other hydrogen generation
- Hydrogen generation
- Small scale thermochemical
Technical Committee:ISO/TC 268This document specifies the quality characteristics of hydrogen fuel and the corresponding quality assurance in order to ensure uniformity of the hydrogen product as dispensed for utilization in proton exchange membrane (PEM) fuel cell road vehicle systems. -
EN ISO 15848-1:2015/A1:2017 Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 1: Classification system and qualification procedures for type testing of valves - Amendment 1x
EN ISO 15848-1:2015/A1:2017
Title of Standard: Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 1: Classification system and qualification procedures for type testing of valves - Amendment 1
Status of Standard: Published
Description : Specifies testing procedures for evaluation of external leakage of valve stem seals (or shaft) and body joints of isolating valves and control valves intended for application in volatile air pollutants and hazardous fluids.
Direct link to this standard, and more information
Responsible Technical Committee: CEN/TC 69
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Hydrogen generation
- Electrolysers
- AEL
- Hydrogen generation
- Electrolysers
- Other
- Hydrogen generation
- Electrolysers
- PEMEL
- Hydrogen generation
- Electrolysers
- SOEL
- Infrastructure
- HRSs
- Infrastructure
- Other Infrastructure
- Hydrogen generation
- Other hydrogen generation
- Infrastructure
- Pipelines
- Hydrogen generation
- Small scale thermochemical
Technical Committee:CEN/TC 69Specifies testing procedures for evaluation of external leakage of valve stem seals (or shaft) and body joints of isolating valves and control valves intended for application in volatile air pollutants and hazardous fluids. -
EN ISO 15848-2:2015 Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 2: Production acceptance test of valvesx
EN ISO 15848-2:2015
Title of Standard: Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 2: Production acceptance test of valves
Status of Standard: Published
Description : Specifies test procedures for the evaluation of external leakage of valve stems or shafts and body joints of isolating valves and control valves intended for application with volatile air pollutants and hazardous fluids.
Direct link to this standard, and more information
Responsible Technical Committee: CEN/TC 69
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Hydrogen generation
- Electrolysers
- AEL
- Hydrogen generation
- Electrolysers
- Other
- Hydrogen generation
- Electrolysers
- PEMEL
- Hydrogen generation
- Electrolysers
- SOEL
- Infrastructure
- HRSs
- Hydrogen generation
- Other hydrogen generation
- Infrastructure
- Other Infrastructure
- Infrastructure
- Pipelines
- Hydrogen generation
- Small scale thermochemical
Technical Committee:CEN/TC 69Specifies test procedures for the evaluation of external leakage of valve stems or shafts and body joints of isolating valves and control valves intended for application with volatile air pollutants and hazardous fluids. -
ISO 13734:2013 Natural gas -- Organic components used as odorants -- Requirements and test methodsx
ISO 13734:2013
Title of Standard: Natural gas -- Organic components used as odorants -- Requirements and test methods
Status of Standard: Published
Description : ISO 13734,2013 specifies requirements and test methods for organic compounds suitable for odorization of natural gas and natural gas substitutes for public gas supply, hereafter referred to as odorants.
Direct link to this standard, and more information
Responsible Technical Committee: ISO/TC 193
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Hydrogen generation
- Electrolysers
- AEL
- Hydrogen generation
- Electrolysers
- Other
- Hydrogen generation
- Electrolysers
- PEMEL
- Hydrogen generation
- Electrolysers
- SOEL
- Hydrogen generation
- Other hydrogen generation
- Hydrogen generation
- Small scale thermochemical
Technical Committee:ISO/TC 193ISO 13734,2013 specifies requirements and test methods for organic compounds suitable for odorization of natural gas and natural gas substitutes for public gas supply, hereafter referred to as odorants.
-
EN 16726:2015+A1:2018 Gas infrastructure - Quality of gas - Group Hx
EN 16726:2015+A1:2018
Title of Standard: Gas infrastructure - Quality of gas - Group H
Status of Standard: Published
Description : This European standard specifies gas quality characteristics, parameters and their limits, for gases classified as group H that are to be transmitted, injected into and from storages, distributed and utilized.
Direct link to this standard, and more information
Responsible Technical Committee: CEN/TC 234
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Infrastructure
- HRSs
- Infrastructure
- Other Infrastructure
- Infrastructure
- Pipelines
Technical Committee:CEN/TC 234This European standard specifies gas quality characteristics, parameters and their limits, for gases classified as group H that are to be transmitted, injected into and from storages, distributed and utilized. -
EN 17127:2018 Outdoor hydrogen refuelling points dispensing gaseous hydrogen and incorporating filling protocolsx
EN 17127:2018
Title of Standard: Outdoor hydrogen refuelling points dispensing gaseous hydrogen and incorporating filling protocols
Status of Standard: Published
Description : This document defines the minimum requirements to ensure the interoperability of public hydrogen refuelling points including refuelling protocols that dispense gaseous hydrogen to Road Vehicles (e.g. Fuel Cell Electric Vehicles) comply with applicable regulations.
Direct link to this standard, and more information
Responsible Technical Committee: ISO/TC 268
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Infrastructure
- HRSs
Technical Committee:ISO/TC 268This document defines the minimum requirements to ensure the interoperability of public hydrogen refuelling points including refuelling protocols that dispense gaseous hydrogen to Road Vehicles (e.g. Fuel Cell Electric Vehicles) comply with applicable regulations. -
EN 682:2002/A1:2005 Elastomeric seals - Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluidsx
EN 682:2002/A1:2005
Title of Standard: Elastomeric seals - Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids
Status of Standard: Published
Description : EN 682:2002 specifies requirements for elastomeric materials used in seals for supply pipes and fittings , ancillaries and valves at operating temperatures in general from -5ø C up to 50ø C and in special cases from -15ø C up to 50ø C, for the following: General applications a) gaseous fuel (manufactured, natural and liquefied petroleum gas (LPG) in gaseous phase), b) hydrocarbon fluids with aromatic content up to 30% (v/v), including LPG in liquid phase.
Direct link to this standard, and more information
Responsible Technical Committee: CEN/TC 208
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Infrastructure
- HRSs
- Infrastructure
- Other Infrastructure
- Infrastructure
- Pipelines
Technical Committee:CEN/TC 208EN 682:2002 specifies requirements for elastomeric materials used in seals for supply pipes and fittings , ancillaries and valves at operating temperatures in general from -5ø C up to 50ø C and in special cases from -15ø C up to 50ø C, for the following: General applications a) gaseous fuel (manufactured, natural and liquefied petroleum gas (LPG) in gaseous phase), b) hydrocarbon fluids with aromatic content up to 30% (v/v), including LPG in liquid phase. -
EN ISO 15330:1999 Fasteners - Preloading test for the detection of hydrogen embrittlement - Parallel bearing surface methodx
EN ISO 15330:1999
Title of Standard: Fasteners - Preloading test for the detection of hydrogen embrittlement - Parallel bearing surface method
Status of Standard: Published
Description : Specifies a preloading test which is able to detect the occurence of hydrogen embrittlement of fasteners at room temperature. This test is applicable to: - metric bolts, screws and studs, - thread forming screws, - self-tapping screws, - self-drilling screws, - nuts, - washers, which are made of steel and are under tensile stress.
Direct link to this standard, and more information
Responsible Technical Committee: CEN/TC 185
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Infrastructure
- HRSs
- Infrastructure
- Other Infrastructure
- Infrastructure
- Pipelines
Technical Committee:CEN/TC 185Specifies a preloading test which is able to detect the occurence of hydrogen embrittlement of fasteners at room temperature. This test is applicable to: - metric bolts, screws and studs, - thread forming screws, - self-tapping screws, - self-drilling screws, - nuts, - washers, which are made of steel and are under tensile stress. -
EN ISO 15848-1:2015/A1:2017 Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 1: Classification system and qualification procedures for type testing of valves - Amendment 1x
EN ISO 15848-1:2015/A1:2017
Title of Standard: Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 1: Classification system and qualification procedures for type testing of valves - Amendment 1
Status of Standard: Published
Description : Specifies testing procedures for evaluation of external leakage of valve stem seals (or shaft) and body joints of isolating valves and control valves intended for application in volatile air pollutants and hazardous fluids.
Direct link to this standard, and more information
Responsible Technical Committee: CEN/TC 69
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Hydrogen generation
- Electrolysers
- AEL
- Hydrogen generation
- Electrolysers
- Other
- Hydrogen generation
- Electrolysers
- PEMEL
- Hydrogen generation
- Electrolysers
- SOEL
- Infrastructure
- HRSs
- Infrastructure
- Other Infrastructure
- Hydrogen generation
- Other hydrogen generation
- Infrastructure
- Pipelines
- Hydrogen generation
- Small scale thermochemical
Technical Committee:CEN/TC 69Specifies testing procedures for evaluation of external leakage of valve stem seals (or shaft) and body joints of isolating valves and control valves intended for application in volatile air pollutants and hazardous fluids. -
EN ISO 15848-2:2015 Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 2: Production acceptance test of valvesx
EN ISO 15848-2:2015
Title of Standard: Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 2: Production acceptance test of valves
Status of Standard: Published
Description : Specifies test procedures for the evaluation of external leakage of valve stems or shafts and body joints of isolating valves and control valves intended for application with volatile air pollutants and hazardous fluids.
Direct link to this standard, and more information
Responsible Technical Committee: CEN/TC 69
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Hydrogen generation
- Electrolysers
- AEL
- Hydrogen generation
- Electrolysers
- Other
- Hydrogen generation
- Electrolysers
- PEMEL
- Hydrogen generation
- Electrolysers
- SOEL
- Infrastructure
- HRSs
- Hydrogen generation
- Other hydrogen generation
- Infrastructure
- Other Infrastructure
- Infrastructure
- Pipelines
- Hydrogen generation
- Small scale thermochemical
Technical Committee:CEN/TC 69Specifies test procedures for the evaluation of external leakage of valve stems or shafts and body joints of isolating valves and control valves intended for application with volatile air pollutants and hazardous fluids. -
ISO 13984:1999 Liquid hydrogen -- Land vehicle fuelling system interfacex
ISO 13984:1999
Title of Standard: Liquid hydrogen -- Land vehicle fuelling system interface
Status of Standard: Published
Description : Specifies the characteristics of liquid hydrogen refuelling and dispensing systems on land vehicles of all types in order to reduce the risk of fire and explosion during the refuelling procedure and thus to provide a reasonable level of protection from loss of life and property.
Direct link to this standard, and more information
Responsible Technical Committee: ISO/TC 197
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Infrastructure
- HRSs
Technical Committee:ISO/TC 197Specifies the characteristics of liquid hydrogen refuelling and dispensing systems on land vehicles of all types in order to reduce the risk of fire and explosion during the refuelling procedure and thus to provide a reasonable level of protection from loss of life and property. -
ISO 15500-1:2015 Road Vehicles -- Compressed natural gas (CNG) fuel system components -- Part 1: General requirements and definitionsx
ISO 15500-1:2015
Title of Standard: Road Vehicles -- Compressed natural gas (CNG) fuel system components -- Part 1: General requirements and definitions
Status of Standard: Published
Description : ISO 15500-1:2015 specifies general requirements and definitions of compressed natural gas fuel system components, intended for use on the types of motor vehicles as defined in ISO 3833. It also provides general design principles, and specifies requirements for instructions and marking.
Direct link to this standard, and more information
Responsible Technical Committee: ISO/TC 22
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Infrastructure
- HRSs
Technical Committee:ISO/TC 22ISO 15500-1:2015 specifies general requirements and definitions of compressed natural gas fuel system components, intended for use on the types of motor vehicles as defined in ISO 3833. It also provides general design principles, and specifies requirements for instructions and marking. -
ISO 17268:2020 Gaseous hydrogen land vehicle refuelling connection devicesx
ISO 17268:2020
Title of Standard: Gaseous hydrogen land vehicle refuelling connection devices
Status of Standard: Published
Description : ISO 17268:2020 defines the design, safety and operation characteristics of gaseous hydrogen land vehicle (GHLV) refuelling connectors.
Direct link to this standard, and more information
Responsible Technical Committee: ISO/TC 197
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Stationary applications
- Storage
- Cylinder Storage
- Infrastructure
- HRSs
Technical Committee:ISO/TC 197ISO 17268:2020 defines the design, safety and operation characteristics of gaseous hydrogen land vehicle (GHLV) refuelling connectors. -
ISO 19880-1:2020 Gaseous hydrogen - Fuelling stations - Part 1: General requirementsx
ISO 19880-1:2020
Title of Standard: Gaseous hydrogen - Fuelling stations - Part 1: General requirements
Status of Standard: Published
Description : ISO 19880-1 defines the minimum design, installation, commissioning, operation, inspection and maintenance requirements, for the safety, and, where appropriate, for the performance of public and non-public fuelling stations that dispense gaseous hydrogen to light duty road vehicles (e.g. fuel cell electric vehicles).
Direct link to this standard, and more information
Responsible Technical Committee: ISO/TC 197
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Infrastructure
- HRSs
- Infrastructure
- HRSs
Technical Committee:ISO/TC 197ISO 19880-1 defines the minimum design, installation, commissioning, operation, inspection and maintenance requirements, for the safety, and, where appropriate, for the performance of public and non-public fuelling stations that dispense gaseous hydrogen to light duty road vehicles (e.g. fuel cell electric vehicles). -
ISO 19880-1:2020 Gaseous hydrogen - Fuelling stations - Part 1: General requirementsx
ISO 19880-1:2020
Title of Standard: Gaseous hydrogen - Fuelling stations - Part 1: General requirements
Status of Standard: Published
Description : ISO 19880-1 defines the minimum design, installation, commissioning, operation, inspection and maintenance requirements, for the safety, and, where appropriate, for the performance of public and non-public fuelling stations that dispense gaseous hydrogen to light duty road vehicles (e.g. fuel cell electric vehicles).
Direct link to this standard, and more information
Responsible Technical Committee: ISO/TC 197
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Infrastructure
- HRSs
- Infrastructure
- HRSs
Technical Committee:ISO/TC 197ISO 19880-1 defines the minimum design, installation, commissioning, operation, inspection and maintenance requirements, for the safety, and, where appropriate, for the performance of public and non-public fuelling stations that dispense gaseous hydrogen to light duty road vehicles (e.g. fuel cell electric vehicles). -
ISO 19880-3:2018 Gaseous hydrogen -- Fuelling stations -- Part 3: Valvesx
ISO 19880-3:2018
Title of Standard: Gaseous hydrogen -- Fuelling stations -- Part 3: Valves
Status of Standard: Published
Description : This document provides the requirements and test methods for the safety performance of high pressure gas valves that are used in gaseous hydrogen stations of up to the H70 designation.
Direct link to this standard, and more information
Responsible Technical Committee: ISO/TC 197
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Infrastructure
- HRSs
Technical Committee:ISO/TC 197This document provides the requirements and test methods for the safety performance of high pressure gas valves that are used in gaseous hydrogen stations of up to the H70 designation. -
ISO 19880-5:2019 Gaseous hydrogen -- Fuelling stations -- Part 5: Hoses and hose assembliesx
ISO 19880-5:2019
Title of Standard: Gaseous hydrogen -- Fuelling stations -- Part 5: Hoses and hose assemblies
Status of Standard: Published
Description : NEN-ISO 19880-5 specifies the requirements for wire or textile reinforced hoses and hose assemblies suitable for dispensing hydrogen up to 70 MPa nominal working pressure, in the operating temperature range of ?40 øC to 65 øC.
Direct link to this standard, and more information
Responsible Technical Committee: ISO/TC 197
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Infrastructure
- HRSs
Technical Committee:ISO/TC 197NEN-ISO 19880-5 specifies the requirements for wire or textile reinforced hoses and hose assemblies suitable for dispensing hydrogen up to 70 MPa nominal working pressure, in the operating temperature range of ?40 øC to 65 øC. -
ISO 19880-8:2019 Gaseous hydrogen -- Fuelling stations -- Part 8: Fuel quality controlx
ISO 19880-8:2019
Title of Standard: Gaseous hydrogen -- Fuelling stations -- Part 8: Fuel quality control
Status of Standard: Published
Description : ISO 19880-8 specifies the protocol for ensuring the quality of the gaseous hydrogen at hydrogen distribution facilities and hydrogen fuelling stations for proton exchange membrane (PEM) fuel cells for road vehicles.
Direct link to this standard, and more information
Responsible Technical Committee: ISO/TC 197
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Infrastructure
- HRSs
Technical Committee:ISO/TC 197ISO 19880-8 specifies the protocol for ensuring the quality of the gaseous hydrogen at hydrogen distribution facilities and hydrogen fuelling stations for proton exchange membrane (PEM) fuel cells for road vehicles.
-
EN 12007-1:2012 Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 1: General functional requirementsx
EN 12007-1:2012
Title of Standard: Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 1: General functional requirements
Status of Standard: Published
Description : This European Standard describes the general functional requirements for pipelines up to the point of delivery, and also for buried sections of pipework after the point of delivery, for maximum operating pressures up to and including 16 bar for gaseous fuels in accordance with EN 437:1993+A1:2009, Table 1.
Direct link to this standard, and more information
Responsible Technical Committee: CEN/TC 234
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Infrastructure
- Pipelines
Technical Committee:CEN/TC 234This European Standard describes the general functional requirements for pipelines up to the point of delivery, and also for buried sections of pipework after the point of delivery, for maximum operating pressures up to and including 16 bar for gaseous fuels in accordance with EN 437:1993+A1:2009, Table 1. -
EN 12007-2:2012 Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 2: Specific functional requirements for polyethylene (MOP up to and including 10 bar)x
EN 12007-2:2012
Title of Standard: Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 2: Specific functional requirements for polyethylene (MOP up to and including 10 bar)
Status of Standard: Published
Description : This European Standard describes the specific functional requirements for polyethylene (PE) pipelines in addition to the general functional requirements of EN 12007-1 for: a) a maximum operating pressure (MOP) up to and including 10 bar, b) an operating temperature between -20 øC and +40 øC.
Direct link to this standard, and more information
Responsible Technical Committee: CEN/TC 234
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Infrastructure
- Pipelines
Technical Committee:CEN/TC 234This European Standard describes the specific functional requirements for polyethylene (PE) pipelines in addition to the general functional requirements of EN 12007-1 for: a) a maximum operating pressure (MOP) up to and including 10 bar, b) an operating temperature between -20 øC and +40 øC. -
EN 12007-3:2015 Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 3: Specific functional requirements for steelx
EN 12007-3:2015
Title of Standard: Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 3: Specific functional requirements for steel
Status of Standard: Published
Description : This European Standard describes the specific functional requirements for steel pipelines in addition to the general functional requirements of EN 12007-1 for maximum operating pressures up to and including 16 bar.
Direct link to this standard, and more information
Responsible Technical Committee: CEN/TC 234
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Infrastructure
- Pipelines
Technical Committee:CEN/TC 234This European Standard describes the specific functional requirements for steel pipelines in addition to the general functional requirements of EN 12007-1 for maximum operating pressures up to and including 16 bar. -
EN 12007-4:2012 Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 4: Specific functional requirements for renovationx
EN 12007-4:2012
Title of Standard: Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 4: Specific functional requirements for renovation
Status of Standard: Published
Description : This European Standard describes specific functional requirements for the renovation of pipework in existing gas infrastructures.
Direct link to this standard, and more information
Responsible Technical Committee: CEN/TC 234
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Infrastructure
- Pipelines
Technical Committee:CEN/TC 234This European Standard describes specific functional requirements for the renovation of pipework in existing gas infrastructures. -
EN 12007-5:2014 Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 5: Service lines - Specific functional requirementsx
EN 12007-5:2014
Title of Standard: Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 5: Service lines - Specific functional requirements
Status of Standard: Published
Description : This European Standard describes the specific functional requirements for service lines in addition to the general functional requirements of EN 12007-1 for: a) a maximum operating pressure (MOP) up to and including 16 bar, b) an operating temperature between -20 øC and +40 øC.
Direct link to this standard, and more information
Responsible Technical Committee: CEN/TC 234
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Infrastructure
- Pipelines
Technical Committee:CEN/TC 234This European Standard describes the specific functional requirements for service lines in addition to the general functional requirements of EN 12007-1 for: a) a maximum operating pressure (MOP) up to and including 16 bar, b) an operating temperature between -20 øC and +40 øC. -
EN 1473:2016 Installation and equipment for liquefied natural gas - Design of onshore installationsx
EN 1473:2016
Title of Standard: Installation and equipment for liquefied natural gas - Design of onshore installations
Status of Standard: Published
Description : This European Standard gives guidelines for the design, construction and operation of all onshore liquefied natural gas (LNG) installations for the liquefaction, storage, vaporization, transfer and handling of LNG.
Direct link to this standard, and more information
Responsible Technical Committee: CEN/TC 282
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Stationary applications
- Storage
- Cylinder Storage
- Infrastructure
- Other Infrastructure
- Infrastructure
- Pipelines
Technical Committee:CEN/TC 282This European Standard gives guidelines for the design, construction and operation of all onshore liquefied natural gas (LNG) installations for the liquefaction, storage, vaporization, transfer and handling of LNG. -
EN 1594:2013 Gas infrastructure - Pipelines for maximum operating pressure over 16 bar - Functional requirementsx
EN 1594:2013
Title of Standard: Gas infrastructure - Pipelines for maximum operating pressure over 16 bar - Functional requirements
Status of Standard: Published
Description : This European Standard is applicable to pipelines with a maximum operating pressure (MOP) over 16 bar for the carriage of processed, non-toxic and non-corrosive natural gas according to EN ISO 13686 in onland gas infrastructure.
Direct link to this standard, and more information
Responsible Technical Committee: CEN/TC 234
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Infrastructure
- Pipelines
Technical Committee:CEN/TC 234This European Standard is applicable to pipelines with a maximum operating pressure (MOP) over 16 bar for the carriage of processed, non-toxic and non-corrosive natural gas according to EN ISO 13686 in onland gas infrastructure. -
EN 16726:2015+A1:2018 Gas infrastructure - Quality of gas - Group Hx
EN 16726:2015+A1:2018
Title of Standard: Gas infrastructure - Quality of gas - Group H
Status of Standard: Published
Description : This European standard specifies gas quality characteristics, parameters and their limits, for gases classified as group H that are to be transmitted, injected into and from storages, distributed and utilized.
Direct link to this standard, and more information
Responsible Technical Committee: CEN/TC 234
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Infrastructure
- HRSs
- Infrastructure
- Other Infrastructure
- Infrastructure
- Pipelines
Technical Committee:CEN/TC 234This European standard specifies gas quality characteristics, parameters and their limits, for gases classified as group H that are to be transmitted, injected into and from storages, distributed and utilized. -
EN 682:2002/A1:2005 Elastomeric seals - Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluidsx
EN 682:2002/A1:2005
Title of Standard: Elastomeric seals - Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids
Status of Standard: Published
Description : EN 682:2002 specifies requirements for elastomeric materials used in seals for supply pipes and fittings , ancillaries and valves at operating temperatures in general from -5ø C up to 50ø C and in special cases from -15ø C up to 50ø C, for the following: General applications a) gaseous fuel (manufactured, natural and liquefied petroleum gas (LPG) in gaseous phase), b) hydrocarbon fluids with aromatic content up to 30% (v/v), including LPG in liquid phase.
Direct link to this standard, and more information
Responsible Technical Committee: CEN/TC 208
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Infrastructure
- HRSs
- Infrastructure
- Other Infrastructure
- Infrastructure
- Pipelines
Technical Committee:CEN/TC 208EN 682:2002 specifies requirements for elastomeric materials used in seals for supply pipes and fittings , ancillaries and valves at operating temperatures in general from -5ø C up to 50ø C and in special cases from -15ø C up to 50ø C, for the following: General applications a) gaseous fuel (manufactured, natural and liquefied petroleum gas (LPG) in gaseous phase), b) hydrocarbon fluids with aromatic content up to 30% (v/v), including LPG in liquid phase. -
EN ISO 15330:1999 Fasteners - Preloading test for the detection of hydrogen embrittlement - Parallel bearing surface methodx
EN ISO 15330:1999
Title of Standard: Fasteners - Preloading test for the detection of hydrogen embrittlement - Parallel bearing surface method
Status of Standard: Published
Description : Specifies a preloading test which is able to detect the occurence of hydrogen embrittlement of fasteners at room temperature. This test is applicable to: - metric bolts, screws and studs, - thread forming screws, - self-tapping screws, - self-drilling screws, - nuts, - washers, which are made of steel and are under tensile stress.
Direct link to this standard, and more information
Responsible Technical Committee: CEN/TC 185
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Infrastructure
- HRSs
- Infrastructure
- Other Infrastructure
- Infrastructure
- Pipelines
Technical Committee:CEN/TC 185Specifies a preloading test which is able to detect the occurence of hydrogen embrittlement of fasteners at room temperature. This test is applicable to: - metric bolts, screws and studs, - thread forming screws, - self-tapping screws, - self-drilling screws, - nuts, - washers, which are made of steel and are under tensile stress. -
EN ISO 15848-1:2015/A1:2017 Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 1: Classification system and qualification procedures for type testing of valves - Amendment 1x
EN ISO 15848-1:2015/A1:2017
Title of Standard: Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 1: Classification system and qualification procedures for type testing of valves - Amendment 1
Status of Standard: Published
Description : Specifies testing procedures for evaluation of external leakage of valve stem seals (or shaft) and body joints of isolating valves and control valves intended for application in volatile air pollutants and hazardous fluids.
Direct link to this standard, and more information
Responsible Technical Committee: CEN/TC 69
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Hydrogen generation
- Electrolysers
- AEL
- Hydrogen generation
- Electrolysers
- Other
- Hydrogen generation
- Electrolysers
- PEMEL
- Hydrogen generation
- Electrolysers
- SOEL
- Infrastructure
- HRSs
- Infrastructure
- Other Infrastructure
- Hydrogen generation
- Other hydrogen generation
- Infrastructure
- Pipelines
- Hydrogen generation
- Small scale thermochemical
Technical Committee:CEN/TC 69Specifies testing procedures for evaluation of external leakage of valve stem seals (or shaft) and body joints of isolating valves and control valves intended for application in volatile air pollutants and hazardous fluids. -
EN ISO 15848-2:2015 Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 2: Production acceptance test of valvesx
EN ISO 15848-2:2015
Title of Standard: Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 2: Production acceptance test of valves
Status of Standard: Published
Description : Specifies test procedures for the evaluation of external leakage of valve stems or shafts and body joints of isolating valves and control valves intended for application with volatile air pollutants and hazardous fluids.
Direct link to this standard, and more information
Responsible Technical Committee: CEN/TC 69
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Hydrogen generation
- Electrolysers
- AEL
- Hydrogen generation
- Electrolysers
- Other
- Hydrogen generation
- Electrolysers
- PEMEL
- Hydrogen generation
- Electrolysers
- SOEL
- Infrastructure
- HRSs
- Hydrogen generation
- Other hydrogen generation
- Infrastructure
- Other Infrastructure
- Infrastructure
- Pipelines
- Hydrogen generation
- Small scale thermochemical
Technical Committee:CEN/TC 69Specifies test procedures for the evaluation of external leakage of valve stems or shafts and body joints of isolating valves and control valves intended for application with volatile air pollutants and hazardous fluids. -
ISO 16486-1:2012 Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing -- Part 1: Generalx
ISO 16486-1:2012
Title of Standard: Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing -- Part 1: General
Status of Standard: Published
Description : ISO 16486-1:2012 specifies the general properties of unplasticized polyamide (PA-U) compounds for the manufacture of pipes, fittings and valves made from these compounds, intended to be buried and used for the supply of gaseous fuels. It also specifies the test parameters for the test methods to which it refers.
Direct link to this standard, and more information
Responsible Technical Committee: ISO/TC 138
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Infrastructure
- Pipelines
Technical Committee:ISO/TC 138ISO 16486-1:2012 specifies the general properties of unplasticized polyamide (PA-U) compounds for the manufacture of pipes, fittings and valves made from these compounds, intended to be buried and used for the supply of gaseous fuels. It also specifies the test parameters for the test methods to which it refers.
-
EN 1473:2016 Installation and equipment for liquefied natural gas - Design of onshore installationsx
EN 1473:2016
Title of Standard: Installation and equipment for liquefied natural gas - Design of onshore installations
Status of Standard: Published
Description : This European Standard gives guidelines for the design, construction and operation of all onshore liquefied natural gas (LNG) installations for the liquefaction, storage, vaporization, transfer and handling of LNG.
Direct link to this standard, and more information
Responsible Technical Committee: CEN/TC 282
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Stationary applications
- Storage
- Cylinder Storage
- Infrastructure
- Other Infrastructure
- Infrastructure
- Pipelines
Technical Committee:CEN/TC 282This European Standard gives guidelines for the design, construction and operation of all onshore liquefied natural gas (LNG) installations for the liquefaction, storage, vaporization, transfer and handling of LNG. -
EN 15069:2008 Safety gas connection valves for metal hose assemblies used for the connection of domestic appliances using gaseous fuelx
EN 15069:2008
Title of Standard: Safety gas connection valves for metal hose assemblies used for the connection of domestic appliances using gaseous fuel
Status of Standard: Published
Description : These valves are suitable for connection of the fixed gas supply system to domestic appliances inside or outside a dwelling using 2nd or 3rd Family gases and at a pressure of up to and including 0,5 bar. These valves are designed for the use with either movable appliances or for the connection of fixed appliances.
Direct link to this standard, and more information
Responsible Technical Committee: CEN/TC 236
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Infrastructure
- Other Infrastructure
Technical Committee:CEN/TC 236These valves are suitable for connection of the fixed gas supply system to domestic appliances inside or outside a dwelling using 2nd or 3rd Family gases and at a pressure of up to and including 0,5 bar. These valves are designed for the use with either movable appliances or for the connection of fixed appliances. -
EN 16726:2015+A1:2018 Gas infrastructure - Quality of gas - Group Hx
EN 16726:2015+A1:2018
Title of Standard: Gas infrastructure - Quality of gas - Group H
Status of Standard: Published
Description : This European standard specifies gas quality characteristics, parameters and their limits, for gases classified as group H that are to be transmitted, injected into and from storages, distributed and utilized.
Direct link to this standard, and more information
Responsible Technical Committee: CEN/TC 234
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Infrastructure
- HRSs
- Infrastructure
- Other Infrastructure
- Infrastructure
- Pipelines
Technical Committee:CEN/TC 234This European standard specifies gas quality characteristics, parameters and their limits, for gases classified as group H that are to be transmitted, injected into and from storages, distributed and utilized. -
EN 682:2002/A1:2005 Elastomeric seals - Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluidsx
EN 682:2002/A1:2005
Title of Standard: Elastomeric seals - Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids
Status of Standard: Published
Description : EN 682:2002 specifies requirements for elastomeric materials used in seals for supply pipes and fittings , ancillaries and valves at operating temperatures in general from -5ø C up to 50ø C and in special cases from -15ø C up to 50ø C, for the following: General applications a) gaseous fuel (manufactured, natural and liquefied petroleum gas (LPG) in gaseous phase), b) hydrocarbon fluids with aromatic content up to 30% (v/v), including LPG in liquid phase.
Direct link to this standard, and more information
Responsible Technical Committee: CEN/TC 208
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Infrastructure
- HRSs
- Infrastructure
- Other Infrastructure
- Infrastructure
- Pipelines
Technical Committee:CEN/TC 208EN 682:2002 specifies requirements for elastomeric materials used in seals for supply pipes and fittings , ancillaries and valves at operating temperatures in general from -5ø C up to 50ø C and in special cases from -15ø C up to 50ø C, for the following: General applications a) gaseous fuel (manufactured, natural and liquefied petroleum gas (LPG) in gaseous phase), b) hydrocarbon fluids with aromatic content up to 30% (v/v), including LPG in liquid phase. -
EN ISO 15330:1999 Fasteners - Preloading test for the detection of hydrogen embrittlement - Parallel bearing surface methodx
EN ISO 15330:1999
Title of Standard: Fasteners - Preloading test for the detection of hydrogen embrittlement - Parallel bearing surface method
Status of Standard: Published
Description : Specifies a preloading test which is able to detect the occurence of hydrogen embrittlement of fasteners at room temperature. This test is applicable to: - metric bolts, screws and studs, - thread forming screws, - self-tapping screws, - self-drilling screws, - nuts, - washers, which are made of steel and are under tensile stress.
Direct link to this standard, and more information
Responsible Technical Committee: CEN/TC 185
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Infrastructure
- HRSs
- Infrastructure
- Other Infrastructure
- Infrastructure
- Pipelines
Technical Committee:CEN/TC 185Specifies a preloading test which is able to detect the occurence of hydrogen embrittlement of fasteners at room temperature. This test is applicable to: - metric bolts, screws and studs, - thread forming screws, - self-tapping screws, - self-drilling screws, - nuts, - washers, which are made of steel and are under tensile stress. -
EN ISO 15848-1:2015/A1:2017 Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 1: Classification system and qualification procedures for type testing of valves - Amendment 1x
EN ISO 15848-1:2015/A1:2017
Title of Standard: Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 1: Classification system and qualification procedures for type testing of valves - Amendment 1
Status of Standard: Published
Description : Specifies testing procedures for evaluation of external leakage of valve stem seals (or shaft) and body joints of isolating valves and control valves intended for application in volatile air pollutants and hazardous fluids.
Direct link to this standard, and more information
Responsible Technical Committee: CEN/TC 69
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Hydrogen generation
- Electrolysers
- AEL
- Hydrogen generation
- Electrolysers
- Other
- Hydrogen generation
- Electrolysers
- PEMEL
- Hydrogen generation
- Electrolysers
- SOEL
- Infrastructure
- HRSs
- Infrastructure
- Other Infrastructure
- Hydrogen generation
- Other hydrogen generation
- Infrastructure
- Pipelines
- Hydrogen generation
- Small scale thermochemical
Technical Committee:CEN/TC 69Specifies testing procedures for evaluation of external leakage of valve stem seals (or shaft) and body joints of isolating valves and control valves intended for application in volatile air pollutants and hazardous fluids. -
EN ISO 15848-2:2015 Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 2: Production acceptance test of valvesx
EN ISO 15848-2:2015
Title of Standard: Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 2: Production acceptance test of valves
Status of Standard: Published
Description : Specifies test procedures for the evaluation of external leakage of valve stems or shafts and body joints of isolating valves and control valves intended for application with volatile air pollutants and hazardous fluids.
Direct link to this standard, and more information
Responsible Technical Committee: CEN/TC 69
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Hydrogen generation
- Electrolysers
- AEL
- Hydrogen generation
- Electrolysers
- Other
- Hydrogen generation
- Electrolysers
- PEMEL
- Hydrogen generation
- Electrolysers
- SOEL
- Infrastructure
- HRSs
- Hydrogen generation
- Other hydrogen generation
- Infrastructure
- Other Infrastructure
- Infrastructure
- Pipelines
- Hydrogen generation
- Small scale thermochemical
Technical Committee:CEN/TC 69Specifies test procedures for the evaluation of external leakage of valve stems or shafts and body joints of isolating valves and control valves intended for application with volatile air pollutants and hazardous fluids.
-
EN 437:2018 Test gases - Test pressures - Appliance categories.x
EN 437:2018
Title of Standard: Test gases - Test pressures - Appliance categories.
Status of Standard: Published
Description : This document specifies the test gases, test pressures and categories of appliances relative to the use of gaseous fuels of the first, second and third families.
Direct link to this standard, and more information
Responsible Technical Committee: CEN/TC 238
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Hydrogen demand
- Ammonia production
- Hydrogen demand
- HRSs
- Hydrogen demand
- Methanol production
- Hydrogen demand
- Other chemicals
- Hydrogen demand
- Power heating and cooling
- Hydrogen demand
- Refineries
Technical Committee:CEN/TC 238This document specifies the test gases, test pressures and categories of appliances relative to the use of gaseous fuels of the first, second and third families.
-
EN 437:2018 Test gases - Test pressures - Appliance categories.x
EN 437:2018
Title of Standard: Test gases - Test pressures - Appliance categories.
Status of Standard: Published
Description : This document specifies the test gases, test pressures and categories of appliances relative to the use of gaseous fuels of the first, second and third families.
Direct link to this standard, and more information
Responsible Technical Committee: CEN/TC 238
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Hydrogen demand
- Ammonia production
- Hydrogen demand
- HRSs
- Hydrogen demand
- Methanol production
- Hydrogen demand
- Other chemicals
- Hydrogen demand
- Power heating and cooling
- Hydrogen demand
- Refineries
Technical Committee:CEN/TC 238This document specifies the test gases, test pressures and categories of appliances relative to the use of gaseous fuels of the first, second and third families.
-
EN 437:2018 Test gases - Test pressures - Appliance categories.x
EN 437:2018
Title of Standard: Test gases - Test pressures - Appliance categories.
Status of Standard: Published
Description : This document specifies the test gases, test pressures and categories of appliances relative to the use of gaseous fuels of the first, second and third families.
Direct link to this standard, and more information
Responsible Technical Committee: CEN/TC 238
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Hydrogen demand
- Ammonia production
- Hydrogen demand
- HRSs
- Hydrogen demand
- Methanol production
- Hydrogen demand
- Other chemicals
- Hydrogen demand
- Power heating and cooling
- Hydrogen demand
- Refineries
Technical Committee:CEN/TC 238This document specifies the test gases, test pressures and categories of appliances relative to the use of gaseous fuels of the first, second and third families.
-
EN 437:2018 Test gases - Test pressures - Appliance categories.x
EN 437:2018
Title of Standard: Test gases - Test pressures - Appliance categories.
Status of Standard: Published
Description : This document specifies the test gases, test pressures and categories of appliances relative to the use of gaseous fuels of the first, second and third families.
Direct link to this standard, and more information
Responsible Technical Committee: CEN/TC 238
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Hydrogen demand
- Ammonia production
- Hydrogen demand
- HRSs
- Hydrogen demand
- Methanol production
- Hydrogen demand
- Other chemicals
- Hydrogen demand
- Power heating and cooling
- Hydrogen demand
- Refineries
Technical Committee:CEN/TC 238This document specifies the test gases, test pressures and categories of appliances relative to the use of gaseous fuels of the first, second and third families.
-
EN 437:2018 Test gases - Test pressures - Appliance categories.x
EN 437:2018
Title of Standard: Test gases - Test pressures - Appliance categories.
Status of Standard: Published
Description : This document specifies the test gases, test pressures and categories of appliances relative to the use of gaseous fuels of the first, second and third families.
Direct link to this standard, and more information
Responsible Technical Committee: CEN/TC 238
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Hydrogen demand
- Ammonia production
- Hydrogen demand
- HRSs
- Hydrogen demand
- Methanol production
- Hydrogen demand
- Other chemicals
- Hydrogen demand
- Power heating and cooling
- Hydrogen demand
- Refineries
Technical Committee:CEN/TC 238This document specifies the test gases, test pressures and categories of appliances relative to the use of gaseous fuels of the first, second and third families.
-
EN 437:2018 Test gases - Test pressures - Appliance categories.x
EN 437:2018
Title of Standard: Test gases - Test pressures - Appliance categories.
Status of Standard: Published
Description : This document specifies the test gases, test pressures and categories of appliances relative to the use of gaseous fuels of the first, second and third families.
Direct link to this standard, and more information
Responsible Technical Committee: CEN/TC 238
Direct link to the scope of this Technical Committee, and more information
This standard applies to the following categories:
- Hydrogen demand
- Ammonia production
- Hydrogen demand
- HRSs
- Hydrogen demand
- Methanol production
- Hydrogen demand
- Other chemicals
- Hydrogen demand
- Power heating and cooling
- Hydrogen demand
- Refineries
Technical Committee:CEN/TC 238This document specifies the test gases, test pressures and categories of appliances relative to the use of gaseous fuels of the first, second and third families.
Give Feedback
International Organization of Legal Metrology (OIML)
The International Organization of Legal Metrology is an intergovernmental treaty organization which develops model regulations, standards and related documents for use by legal metrology authorities and industry. OIML represents the interests of the legal metrology community within international organizations and forums concerned with metrology, standardization, testing, certification and accreditation. Promotes and facilitates the exchange of knowledge and competencies within the legal metrology community worldwide and cooperates with other metrology bodies.
International Organization for Standardization (ISO)
ISO is an independent, non-governmental international organization with a membership of 164 national standards bodies. Through its members, it brings together experts to share knowledge and develop voluntary, consensus-based, market relevant International Standards that support innovation and provide solutions to global challenges.
International Electrotechnical Commission (IEC)
The International Electrotechnical Commission is the leading global organization that publishes consensus-based International Standards and manages conformity assessment systems for electric and electronic products, systems and services, collectively known as electrotechnology. IEC publications serve as a basis for national standardization and as references when drafting international tenders and contracts.
European Committee for Standardization (CEN)
CEN, the European Committee for Standardization, is an association that brings together the National Standardization Bodies of 34 European countries. CEN is officially recognized by the European Union and by the European Free Trade Association (EFTA) as being responsible for developing and defining voluntary standards at European level. CEN provides a platform for the development of European Standards and other technical documents in relation to various kinds of products, materials, services and processes.
CENELEC
CENELEC is the European Committee for Electrotechnical Standardization and is responsible for standardization in the electrotechnical engineering field. CENELEC prepares voluntary standards, which help facilitate trade between countries, create new markets, cut compliance costs and support the development of a Single European Market. CENELEC creates market access at European level but also at international level, adopting international standards wherever possible.